Help for a highlander....I have been having trouble with my washer spray...neither front or back washer spray systems work. They went out around October. Have been to a few to have it fixed with no idea on what is wrong....any thoughts for what might be going on.
Help for a Highlander
- Thread starter LufLife
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Do you have an owners manual?
I would probably check the fluid then the fuse.
Could be the switch, fuse, any of the wiring along the way, the pump (kinda doubt it's the pump because I think there are two separate ones for front and rear) you could be out of fluid, or have a clog in the lines.
What do you have in the way of electrical testing equipment?
Welcome to Mud!
I would probably check the fluid then the fuse.
Could be the switch, fuse, any of the wiring along the way, the pump (kinda doubt it's the pump because I think there are two separate ones for front and rear) you could be out of fluid, or have a clog in the lines.
What do you have in the way of electrical testing equipment?
Welcome to Mud!
2x on raydouble's suggestion
also make sure the nozzles aren't clogged - just my .02
and welcome to mud
also make sure the nozzles aren't clogged - just my .02
and welcome to mud
2x on raydouble's suggestion
also make sure the nozzles aren't clogged - just my .02
and welcome to mud
Good call on the nozzles.....you should be able to hear the pump run if you find it and have some one hit the button (if it's working that is)
