Wanted HELP...Engine Parts Needed For 1970 FJ40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 11, 2005
Threads
9
Messages
33
Location
Flagstaff, AZ
Location
United States
I need: crankshaft pully, carb (just had a big SNAFU with mine, I was in the process of rebuilding), alternator (working), alternator brackets, water pump, oil pump, and I am sure I need other things that I cannot think of right now. Hell if you are relatively close I will even buy an engine off someone that is doing a v8 swap. Just let me know if you can help.

Darrin
Flagstaff AZ
dfblackm@yahoo.com
 
I wouldn't buy a used waterpump or oil pump...both critical parts that are needed to keep the engine from going boom.

I am pretty sure i have a 72 carb prob needs rebuild, F crank pully, and alternator brackets. I will check tomorrow.

Stew
 
Yeah I know I should not buy used water pump or oil pump, but I figured that I could use it to get the motor together, I know I would not be driving with these, but just to get it back together.
 
I have an Asco oil pump see pix and an alternator with a narrow pulley. Pump appears to be in good condition but I have never used it. Alternator was working on my 73 F when it crapped out. $50 plus shipping for both
 
Last edited:
Oil pump looks nice, I am really trying to see if one person has all the parts I am needing, otherwise I will get back with you.

Anyone else, let me know.

Darrin
 
I can help and ship tom. :)
 
I have some parts dude!

i have alot of misc parts for the 2f especially but i have some f parts, valve covers, carbs, alternators, acouple of starters, a radiator, radiator holder, and some other things. let me know exactly if there are any other parts needed you did not mention. hit me up with an e-mail

t_rambis_2@yahoo.com
 
I have a complete running 1973 engine,but it's in Pittsburgh. Don't if this will help, but I will sell parts off of it. Let me know.

Mark
 
Ok well I posted a big newbie post on the 40 questions section. So I actually have an F engine with a 3 speed trans/vac asst t-case. So once again I need several engine parts. If you head over to the thread on the 40 questions you can see pictures of my engine/or lack there of.

What I have:
Block (pistons, head, cam) (pulled the valve cover and front cover, everything is well oiled and lubricated)
Dizzy
Oil Pump (don't know condition)

So I need for an F engine:
Crank shaft pully
Water pump
Alternator Brackets
Alternator
Carb
Fuel lines
Oil lines
Starter

Now if you have these things lying around and don't know if they work, that is fine, some things I would like in good condtion. The pulley would need to be in good usible condition. I would like for the lines to be in decent condition. As for other things if you want to just send them out to me and I pay shipping that is fine, granted I don't want a pile of junk but I can use this stuff to dummy up the engine.

Thanks for all of your help.

Darrin
 
you have part of the F alt bracket. looking at the motor from the front it's to the right of the crank bolted down on the side.. all you need is an alt and the other flat stock piece for belt adjustment.
 
Good info, as I said in my other post, I am really learning here, and you guys are really helping me out. So I have sent several pms and emails, so let me know what you have. Thanks.

Darrin
 

Users who are viewing this thread

Back
Top Bottom