Half drawer system? Anyone done it?

[paflytyer]

Just wondering if anyone has done a half drawer setup that still left the other half of the 3rd row usable? I'd like to see it and get some feedback. I want to gain some storage space for gear and mounting my inverter, but still have the ability to remove the other seat for sleeping, or retain the use of one seat if I need it. Pics? Ideas?

 

[RobRed]

I dont recall seeing any pics with one seat but visualizing it is pretty easy to do. This will be the result... you'll do it, be stoked, then be pissed at yourself for not doing both sides. Drawers (storage) is a life changing event.

 

[CappyKD]

I am in the same boat. I want a drawer system, but have 4 kids and need to be able to keep one of the third row seats and also need to be able to sleep two in the back... I'm not sure how I will go about it yet, it will be interesting to see what others have done.

 

[RobRed]

Design a system that double stacks two single drawer units. When you want, pop the remaining third row seat out and move the upper drawer box to the floor giving you a side by side system to sleep on.

 

[Taildragon]

zane has

 

[BamaHeel]

I am in the same boat. I want a drawer system, but have 4 kids and need to be able to keep one of the third row seats and also need to be able to sleep two in the back... I'm not sure how I will go about it yet, it will be interesting to see what others have done.

This ^^^^^^ is the same boat I'm in. Any pics?

 

[B-RAD]

I made mine, so there are two seperate drawer units, that are bolted/together, or could be used seperately. Check out the link for photos.

https://forum.ih8mud.com/100-series-cruisers/479080-drawers-some-plans.html

 

[patrickfinley]

Seems like people would do this, that's why most drawers are sold in sets of 2.

 

[paflytyer]

I don't think one half of the standard drawer systems would allow enough room for one jumpseat to remain in place. Looks like it would need to be a custom build, which is what I am planning. Am I wrong?

 

[paflytyer]

I made mine, so there are two seperate drawer units, that are bolted/together, or could be used seperately. Check out the link for photos.

https://forum.ih8mud.com/100-series-cruisers/479080-drawers-some-plans.html

Thanks! That gives me some ideas. Are you able to seperate the drawers and still leave one jumpseat in place?

 

[paflytyer]

zane has

Found it https://forum.ih8mud.com/100-series-cruisers/245995-100-series-rear-drawer-system-build-w-picks.html

This is exactly what I was looking for. I searched and searched on here......... a "google" search is what finally got me to Zanes page. PM sent his way......

 

[FMKV]

Made the drawers to fit the third row too,Dont know how most people were mounting their drawers but I just left one seat in and measured tight to the seat with it locked in place. Built one side to make sure the seat would fols and lock back down. Once satisfied, repeated for the opposite side.

 

[FMKV]

fols = fold

 

[CappyKD]

Made the drawers to fit the third row too,Dont know how most people were mounting their drawers but I just left one seat in and measured tight to the seat with it locked in place. Built one side to make sure the seat would fols and lock back down. Once satisfied, repeated for the opposite side.

Got any Pics?

 

[jasong]

This is also going to be my winter project... if I can ever get around to it. I have kids and need the use of one side. I also want to integrate a shallow subwoofer on one end behind the second row of seats... anyone done that yet? My plan is to get one side done then look into a removable second side.

 

[RobRed]

This is also going to be my winter project... if I can ever get around to it. I have kids and need the use of one side. I also want to integrate a shallow subwoofer on one end behind the second row of seats... anyone done that yet? My plan is to get one side done then look into a removable second side.

Several of us have done the integrated sub. Find my drawer thread and subscribe. I'll be updating it this week as the construction proceeds.

 

[FMKV]

They're around here somewhere I'll post some shortly.

 

[Taildragon]

Found it https://forum.ih8mud.com/100-series-cruisers/245995-100-series-rear-drawer-system-build-w-picks.html

This is exactly what I was looking for. I searched and searched on here......... a "google" search is what finally got me to Zanes page. PM sent his way......

Sorry for the short crappy answer I gave you earlier. I figured you would be able to search for him, I didn't have time to dig up the thread for you earlier. JT