gutted interior

[nelsonmr]

So I've got everything stripped from inside my cruiser in order to install sound deadening and new carpet.

Anything I should be doing or considering doing while I'm at this point???

 

[60Works]

Look for and repair any rust spots you see. Even on a clean truck rust can show up in the pinch welds around the rear wheel wells. Clean and lube the window regulators. Consider replacing old seat belts. Plan for future electrical upgrades and install any required wire bundles.

 

[FishTown]

I'd really like to do this in the next year or so. Report back if you have any suggestions if you were to do it again.

 

[landcruiserjunky]

Plan for future electrical upgrades and install any required wire bundles.

This! Last thing you want to do is get everything squared away, looking perfect and then have to pull it up and readjust.

 

[nelsonmr]

Thanks for the input.
I'm replacing window runs, and cleaning and greasing everything that moves inside the doors.
Amazingly no rust except some surface rust at the very lip of the bed/cargo floor where it ends in the tailgate gap. For now wire wheel and prime it'll be better addressed with future repaint.
I've got new radio/stereo. While it's all out, I'll bring it by the stereo shop and have them do whatever may be needed in the future.