Who's all going? I'm leaving Monday or Tuesday if anyone wants to convoy up there.
GSMTR
- Thread starter FL cruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I was really hoping to go, truck runs and drives but it has reduced power. Fuel and timing are good. Light throttle is great medium throttle i have no power but if i floor it i have full power. Not sure if it’s a tps sensor or crank sensor, idk. Haven’t been to Gsmtr since 2013 really worked hard trying to get my 80 ready for this year but I’ve given up now.
Please post a few pictures when you get back.
Please post a few pictures when you get back.
- Thread starter
- #3
Damn Justin. So close. Hopefully you'll have it bug free and ready for next year, (or next trail ride). You sure you can't just slap on a TPS and fix the problem?
I have a tps on order, not sure how to adjust them tho.
WHere are the pics?
- Thread starter
- #6
I didn't take any, but the St Augustine guys did share theirs.
Not many Cruiser pics other than Dennis. Wheeled with the mini truck guys this trip.
Not many Cruiser pics other than Dennis. Wheeled with the mini truck guys this trip.
- Thread starter
- #7
g
- Thread starter
- #8
m
- Thread starter
- #9
b
- Joined
- Jul 22, 2012
- Threads
- 637
- Messages
- 17,322
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
Awesome pics. I wonder if my 62 will go up that 
- Thread starter
- #11
My only breakage was a front driveshaft that snapped in half. Clean smooth break.
Steve M had a spare square shaft and Dennis welded up a new one with the spare parts.
Steve M had a spare square shaft and Dennis welded up a new one with the spare parts.
- Thread starter
- #12
Trail side driveshaft fab
- Thread starter
- #13
Dennis" amazing 2.5 hr clutch changeout. Winch to snatch block on roll cage. Cable attached o tranny through hole in floorboard.
- Thread starter
- #14
Andrew had an idler pulley bearing freeze and lost a timing belt on the Tacoma. At least it was close to the end of the trip
- Thread starter
- #15
Some of you might recognize this Florida guy. He flopped it a couple of times this trip.
Looks like a good trip... Nice job on the new rig Steve!
Great Florida representation
- Thread starter
- #19
It did quite well. Very pleased. No problems going where everyone else went. Had a couple minor issues, but was able to drive the trails every day. It would be really awesome with some stickys.
- Thread starter
- #20
Hi Al, Good to see your alive and well! If you don't have a trail rig or one in the works, Trace is going to sell his 60 for a reasonable price. comes with a complete roll cage and cattle guard front end. Would be a great Velveeta #2