Group buy-Fender extensions-interests? (1 Viewer)

[Off Duty]

I am interested as well. Does this price just get them into the country? Then shipping to each individual location would be additional shipping?

Unfoirtunately, yes.

I'm arranging shipping to the Port of Tampa, then I will pick them up and make sure they are distributed to the proper locations around the country.

The shipping prices will be different for each area.

Someone mentioned doing one shipment to the east coast and one to the west coast?

The larger the order the lower the price (to a point). Since so far the orders are from all over the US and BC. I'm not sure how that would work out for everyone?

If there's no major objection, I'll just stick with the original plan of Tampa and out.

There's no additional cost built in on my end. Straight shippping cost from Tampa to ???? is all that is added to the original price

 

[bursabaju]

Before snorkel added on this vehicle

The pictures from this vehicle, before the snorkel added on..

 

[bursabaju]

Before snorkel added

Pictures again, before snorkel added on this vehicle

 

[bursabaju]

Pictures close up

Pictures close up, for front overfender.

 

[Off Duty]

Very clean work. Nice fit & Finish

 

[bursabaju]

Thank you, Mr. Gordon 'Off Duty'

Dear Mr. Gordon,

Thank you for your opinions and thread that you have made in Ih8mud.com.

It will mean nothing, without your help.
I really appreciate and respect you, Mr. Gordon.

Thank you.
Have a nice weekend there in Florida, United States.

Very clean work. Nice fit & Finish

 

[Perrymason]

In my travels from shop to shop here in Indonesia i have seen 2 different styles of the over fender a 2"with no bolts visible and the 3" version shown here. I have not seen the front fender done like this before though. Looks very cool. Excellent work or your cruiser.

 

[bursabaju]

Thank you for your opinion, Sir.

Dear Mr. 'Perrymason',

Thank you for your opinions, Mr. 'Perrymason',

Yes, there are many kinds of overfender for Toyota Landcruiser 40 series.

There is also a model which call Bushwacker from United States.

But personally, I prefer with the model that I made.

Because it will add the value (price) from your 40 series vehicles.

And other way, your car will look cleaner, beautiful, and strong muscle.
Even if you use 31', 33', or 35' tires...it will change dramatically your vehicle appearance.

Anyway, your family member will love the 'New / Fresh loook' with addition of those flares.

Thank you, Mr. 'Perrymason'
Have a nice weekend..

In my travels from shop to shop here in Indonesia i have seen 2 different styles of the over fender a 2"with no bolts visible and the 3" version shown here. I have not seen the front fender done like this before though. Looks very cool. Excellent work or your cruiser.

 

[stevejmiles]

I am interested in a set. Just to clarify this is going to fit over the stock body with no cutting? Also not sure if all models and years are the same for shape and fuel door location. Anyone know?

What would the size/weight of the box be of a full set so I can get an estimated price on the final shipping from Tampa.

Thanks

 

[Raff2145]

I'll take a set too! Who do I talk to specifically to place my order?

 

[FishNinJay]

I'll take a set too! Who do I talk to specifically to place my order?

I think you just placed your order.

Mr. BursaBaju in Indonesia makes them, and Mr. Off Duty in Tampa, FL has been kind enough to handle things here in the U.S.

I had a question, I don't think it was brought up above.. do these fenders bolt on to the original metal fenders underneath? Or do the outer edges of the original fenders have to be cut at all? I assume the bolt-on holes need to be drilled into the original, but I'm hoping that's all. They look fantastic from a short distance away. Could we also get a close-up pic of the edge of these black fiberglass fenders edge against the original yellow metal fender? Much thanks!

 

[Off Duty]

I'll take a set too! Who do I talk to specifically to place my order?

That'd be me

I'll be getting with everyone right after the 4th to make the 1st order. If there's enough interest, we'll set up a second and so forth.

I think you just placed your order.

Mr. BursaBaju in Indonesia makes them, and Mr. Off Duty in Tampa, FL has been kind enough to handle things here in the U.S.

I had a question, I don't think it was brought up above.. do these fenders bolt on to the original metal fenders underneath? Or do the outer edges of the original fenders have to be cut at all? I assume the bolt-on holes need to be drilled into the original, but I'm hoping that's all. They look fantastic from a short distance away. Could we also get a close-up pic of the edge of these black fiberglass fenders edge against the original yellow metal fender? Much thanks!

Mr. BursaBaju-Can you please try to answer the question ARC1 has above? The 2 specific areas of interest are bolded and underlined above.

Gordon

 

[antFJ]

hey guys just a heads up because i haven't seen it mentioned on this thread yet... the rear fenders will be different depending on 1979-1982 FJ40... 1974?-1978 FJ40 and pre-1974?

see how the fender is cut specifically for the 79-82' gas tank door?


note: i also think you'll be hard pressed to get stock lights on there without modification to the flares pictured. the stock lights mount just forward of where the apron meets the fender and these flares go a little aft of where the apron meets the fender - i could be wrong but from my eye it doesn't look like it

great looking product also.. it will be cool to see another part thats not offered in the US make its way here


one more thing - look here for pics of him making the flares and pictures of how they mount.. you can see that there is no cutting required
https://forum.ih8mud.com/40-55-series-tech/360587-build-my-bad-bj40-1982-a.html

 

[ai13]

ai13 from sarawak,malaysia

hi,im from sarawak, malaysia..i myself do own a bj40..i'm interested with your fender flares.can i buy from u and what is the cost of the courier service to sarawak??

 

[bursabaju]

Flares

Flares from other BJ40 1984

 

[bursabaju]

Answer Question from Mr. 'ARC1'

Dear Mr. 'ARC1'

For these fenders bolt, you need to drill to the original fenders, without any cut needed.

I made the mould, according/based to the original fenders / standard fenders from FJ40 and BJ40.

So, you should drill the original fenders, both for front and rear side.
After that, you can put the bolt inside.

If you have any more questions, please don't be hesitate to ask.
It is my pleasure to help you.

Thank you.

I think you just placed your order.

Mr. BursaBaju in Indonesia makes them, and Mr. Off Duty in Tampa, FL has been kind enough to handle things here in the U.S.

I had a question, I don't think it was brought up above.. do these fenders bolt on to the original metal fenders underneath? Or do the outer edges of the original fenders have to be cut at all? I assume the bolt-on holes need to be drilled into the original, but I'm hoping that's all. They look fantastic from a short distance away. Could we also get a close-up pic of the edge of these black fiberglass fenders edge against the original yellow metal fender? Much thanks!

 

[bursabaju]

Dear Sir

Dear Sir,

Thank you for your interest.

I can supply you a set of overfender which consist of 2 pieces front and 2 pieces rear.

I can also supply you with a snorkel.

For shipping cost, I will find out the sea freight cost and air freight cost by fedex.

I will inform you soon.
Please let me know your email address.

For other friends from Ih8mud.com from Australia.
Because there are many interest from Australia as well, I suggess to make a new thread for Australia.
So we can reduce and save the shipping cost to Australia if I could sent as many flares by sea freight.

Because I did not want to make a new thread myself, it will looks like that I am trying to get orientated to make money profit from Ih8mud.com.

Personally, I sell this flares & snorkel & other parts without the point of money profit.
I just want to share with other friends from Ih8mud.com with little / traditional skills that I got and I present this flares for you to make a better looks from Toyota Landcruiser 40 series around the world.

Life is not just money oriented, but making a good friendship with other members in Ih8mud.com is more important for me.


Thank you.

Once again, my English is not so good.
Please forgive me, if I made any mistake with my poor English language.

hi,im from sarawak, malaysia..i myself do own a bj40..i'm interested with your fender flares.can i buy from u and what is the cost of the courier service to sarawak??

 

[bursabaju]

Other parts that you can add on

Other parts that you can add on your vehicles.
It looks beautiful and have a good function.

If you did not use your hood latch anymore, you can add the parts (I don't know how to call it). But I gave a pink color marking on those parts.

Thank you.

 

[bursabaju]

Other pictures

Other pictures that maybe useful for other members in Ih8mud.com

 

[ai13]

hi,i'm ai13 from sarawak,malaysia...i'm interested with the flares.how can i buy from u n what is the cost of courier service to sarawak???tq.
these are some pics of my bj40.hope to get reply from u soon mr bursabaju,tq