FZJ80 Stereo Harness

[mattman555]

I'm putting in a new stereo head unit and the TPO (The previous owner) did a part chop job on the head unit wiring harness. I'm putting this into a 96 FZJ80.

I've been looking for a diagram or pin out for this harness but to no avail. I checked the 96 electrical FSM but it seemed to have split up this harness on to many pages.

Right now I just need to know which wire is illumination control but ultimately I'd like to find the total pin out.

If anyone has a good diagram, maybe a even a self made diagram you used to hook up your head unit, or knows which wire is for illumination control can you post up?

Thanks!

 

[Douglas S]

This should match. No guarantees though.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/120/120701761.PDF

 

[canman]

I just came across the 96 EWD manual in pdf in a link posted by Cnorm5623 in his cummins build thread.

https://dl.dropboxusercontent.com/c...1zQLejVKeJ16QKnQdJroHXee7WkClix4Vfm0DMCP?dl=1

On page 79 there is a schematic for illumination of several items incl the radio. Looks like the green coloured wires are used for illumination in connectors R1 & R3 (pos 10) and connector R2 (pos 2).



Hope this helps.

 

[mattman555]

Thanks both of those where helpful and I found the radio illumination wire.

Funny thing it looks like the head unit I'm putting in, JCV KDHDR52, has an brightness functions built in. Settings are by time of day or when lights are on. This is part of the reason why I was having some issues with illumination.

 

[Reverend Ink]

Back when I worked in Toyota parts dept. I'd order people a "theft kit" that had a replacement plug with wiring. Naturally, you just color matched the new plug to what was left of the harness and you'd be GTG. Anyone know if they still offer those kits?