FZJ80 1" Swaybar drop blocks

FirstToy

 
 
Joined
Nov 27, 2003
Messages
4,409
Location
Socal
I made these for mine just to give a bit more insurance against the swaybar touching the driveshaft at full droop- and bring the swaybar closer to stock attitude.

I made 2 more sets (all the material I had) and figure if I sell them it will break me even on this little mod.

I made them from a chunk of billet aluminum- they are not some perfect production piece, but they are fully functional.
1" thick and dimensionally slightly larger than the swaybar mounting. You will need to buy 4 longer bolts (I used 8mm 1 25 x 60mm- but I think 50mm length would be better)



$25 + shipping (or pickup local socalif)

PM me if you want it.
 

e9999

You want to do what...?
Moderator
 
 
Joined
Sep 21, 2003
Messages
16,707
Location
US
did you tap a thread in some of these holes? is that necessary?
 

FirstToy

 
 
Joined
Nov 27, 2003
Messages
4,409
Location
Socal
Thanks for the interest! I believe both sets are sold now. I'll post if someone backs out.

If I make something else later, I'll cut up a couple more for you guys.
 
Top Bottom