- Location
- United States
I made these for mine just to give a bit more insurance against the swaybar touching the driveshaft at full droop- and bring the swaybar closer to stock attitude.
I made 2 more sets (all the material I had) and figure if I sell them it will break me even on this little mod.
I made them from a chunk of billet aluminum- they are not some perfect production piece, but they are fully functional.
1" thick and dimensionally slightly larger than the swaybar mounting. You will need to buy 4 longer bolts (I used 8mm 1 25 x 60mm- but I think 50mm length would be better)
$25 + shipping (or pickup local socalif)
PM me if you want it.
I made 2 more sets (all the material I had) and figure if I sell them it will break me even on this little mod.
I made them from a chunk of billet aluminum- they are not some perfect production piece, but they are fully functional.
1" thick and dimensionally slightly larger than the swaybar mounting. You will need to buy 4 longer bolts (I used 8mm 1 25 x 60mm- but I think 50mm length would be better)
$25 + shipping (or pickup local socalif)
PM me if you want it.
