fuse box issue? (1 Viewer)

[3_puppies]

wife's daily driver quit, crank no start, during troubleshooting, found EFI relay had keyed latching power but no in and out power.
fuses all good. after pulling fuse and swapping, I got power in.
is this the issue other have with the fuse box?
@medtro fix to solve this?
is it the wire out from the fuse to the relay causing issue? as I had power thru the fuse

2000 LC 208,000 miles

 

[medtro]

Yes, @medtro fix will solve this based on your description. Did you have flashing security light during crank with no start?

 

[3_puppies]

to finish this thread
I ended up using 1 of the 2 unused fuse locations in the fuse block
using a fuse tap, making sure I had the hot side of the fuse holder and only used the tap portion of the fuse tap
I did not install the other fuse as that circuit was not used before
it's been running this way for the last month, so far so good