- Year
- 1975
- Vehicle Model
- 40 Series
- Mileage
- 13245
- Color
- Green
- Outside Link
- https://www.facebook.com/groups/1070179696689644/
Price: $26,500
1975 Toyota FJ40 Landcruiser
www.facebook.com
- Small block Chevy motor with Toyota stock 4 speed and transfer case.
- Champion 4 row Aluminum radiator.
- SOA suspension front and rear with a mild stretch on both axles.
- Shackle reversal on front.
-Working Vintage Air front heater. Available stock rear included. Not hooked up.
- Rust free and was a frame off.
- Frame has been treated with POR-15/Chassis saver during frame off.
- Clean PA title in hand.
- Tons of custom work to include a one of a kind drop-down tailgate.
-Brand new Metal Tech family cage. Cage pictured was replaced by Robs Customs.
-(4) Brand new 38.5 super swampers on 15x12 steelies
-Monstalined OD green exterior.
-Brand new auto meter gauges.
-Brand new poly gas tank and sender.
-Kicker 6.5” speakers front and rear.
-Transfer case was just rebuilt. 6 miles on it.
-Entire inside of the tub was stripped to bare metal and coated in 3M body Shutz Bedliner.
-Warn VR8 winch
Warn 7” off road lights up front
-Custom 4plusproducts front bumper
-Custom 4plusproducts side steps
-Tuffy center console
-Procar by Scat front seats.
-Rear bench seat professionally recovered to match front seats. Bench from Toyota Previa and pops right out for more space if needed.
-Cityracer LED headlights.
-LED tailights
-Metal Tech tube front fenders.
-Custom half doors.
-Scout II power steering box
-New power steering reservoir and belt.
-New Optima 8014-045 D34/78 Yellow Top battery
Front axle-
-Cut and turned for proper caster and pinion angle.
-Mini truck/fj60 knuckles and disc brakes.
-Front axle completely rebuilt and added Spartan locker.
-4x4labs high steer arms with 1 ton ends.
-Custom Tom woods cv driveshaft.
Rear axle-
-Disc brakes with two spare rotors.
-Lincoln locker(welded spider).
-New brake lines.
-Custom Tom woods cv driveshaft
There is a lot more now as well to include a brand new Holley Sniper EFI installed as well as a larger intake manifold. 40 is currently at Rob’s Customs a local shop finishing up the metaltech cage. I'll have better pics once finished or you are welcome to arrange to see it there.
1975 Toyota FJ40 Landcruiser
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
- Small block Chevy motor with Toyota stock 4 speed and transfer case.
- Champion 4 row Aluminum radiator.
- SOA suspension front and rear with a mild stretch on both axles.
- Shackle reversal on front.
-Working Vintage Air front heater. Available stock rear included. Not hooked up.
- Rust free and was a frame off.
- Frame has been treated with POR-15/Chassis saver during frame off.
- Clean PA title in hand.
- Tons of custom work to include a one of a kind drop-down tailgate.
-Brand new Metal Tech family cage. Cage pictured was replaced by Robs Customs.
-(4) Brand new 38.5 super swampers on 15x12 steelies
-Monstalined OD green exterior.
-Brand new auto meter gauges.
-Brand new poly gas tank and sender.
-Kicker 6.5” speakers front and rear.
-Transfer case was just rebuilt. 6 miles on it.
-Entire inside of the tub was stripped to bare metal and coated in 3M body Shutz Bedliner.
-Warn VR8 winch
Warn 7” off road lights up front
-Custom 4plusproducts front bumper
-Custom 4plusproducts side steps
-Tuffy center console
-Procar by Scat front seats.
-Rear bench seat professionally recovered to match front seats. Bench from Toyota Previa and pops right out for more space if needed.
-Cityracer LED headlights.
-LED tailights
-Metal Tech tube front fenders.
-Custom half doors.
-Scout II power steering box
-New power steering reservoir and belt.
-New Optima 8014-045 D34/78 Yellow Top battery
Front axle-
-Cut and turned for proper caster and pinion angle.
-Mini truck/fj60 knuckles and disc brakes.
-Front axle completely rebuilt and added Spartan locker.
-4x4labs high steer arms with 1 ton ends.
-Custom Tom woods cv driveshaft.
Rear axle-
-Disc brakes with two spare rotors.
-Lincoln locker(welded spider).
-New brake lines.
-Custom Tom woods cv driveshaft
There is a lot more now as well to include a brand new Holley Sniper EFI installed as well as a larger intake manifold. 40 is currently at Rob’s Customs a local shop finishing up the metaltech cage. I'll have better pics once finished or you are welcome to arrange to see it there.
Last edited:
