FJ62 Tcase manual vacuum valve conversion "kit" $60 - Spokane WA
I'm selling my manual vacuum valve which I've run on my FJ62 for almost five years now. It has worked flawlessly, but with my upcoming conversion to an H55 and a fully mechanical tcase using Georg's twin stick kit, I no longer need it. So I'm selling the valve with nipples, vent filters (which you can see attached to the valve in the pics), customized FJ62 "blank" dash plate that I mounted my valve to, the necessary vacuum lines, adel clamp to support the tcase lines on the firewall and check valve for the manifold vacuum line. Details on the kit and what I did to utilize it here. I am not including the 4WD light mod I did since I ditched that shortly after and went back to using the 62's factory 4WD light.
One last thing: I had some 3mm silicon vacuum line left over from finishing my desmog, so I'm including that in the package, already installed on the valve. This is the blue line in the pics, which will attach to your manifold vacuum source.
I'm asking $60 which includes shipping in a USPS flat rate box. Located in Spokane WA so if you're local and want to pick it up in person, I'll ask $50.
If you have any questions feel free to ask here or PM me.
Some pics:
The backside of the valve assembly mounted to the "blank" plate.
The plate with the valve mounted. This is how you'd see it when looking at your dash.
The complete assembly with vacuum hoses, adel clamp and vacuum source check valve.
Edit: SOLD! Thanks for the interest!
I'm selling my manual vacuum valve which I've run on my FJ62 for almost five years now. It has worked flawlessly, but with my upcoming conversion to an H55 and a fully mechanical tcase using Georg's twin stick kit, I no longer need it. So I'm selling the valve with nipples, vent filters (which you can see attached to the valve in the pics), customized FJ62 "blank" dash plate that I mounted my valve to, the necessary vacuum lines, adel clamp to support the tcase lines on the firewall and check valve for the manifold vacuum line. Details on the kit and what I did to utilize it here. I am not including the 4WD light mod I did since I ditched that shortly after and went back to using the 62's factory 4WD light.
One last thing: I had some 3mm silicon vacuum line left over from finishing my desmog, so I'm including that in the package, already installed on the valve. This is the blue line in the pics, which will attach to your manifold vacuum source.
I'm asking $60 which includes shipping in a USPS flat rate box. Located in Spokane WA so if you're local and want to pick it up in person, I'll ask $50.
If you have any questions feel free to ask here or PM me.
Some pics:
The backside of the valve assembly mounted to the "blank" plate.
The plate with the valve mounted. This is how you'd see it when looking at your dash.
The complete assembly with vacuum hoses, adel clamp and vacuum source check valve.
Edit: SOLD! Thanks for the interest!
Last edited:
