Wanted FJ60 Manual (11 Viewers)

[Indiomonk]

WTB 33x9.5 tires.. 5 of them.

Sell me those 33x9.5 tires!

Thanks
zach v

 

[Indiomonk]

WTB Diamond Plate for my Rusty 78 FJ40

Common! sell me some STEEL!

zach v

 

[Indiomonk]

WTB FULL roll cage for my 78FJ40

Sell me your Full Cage! for my 78 FJ40


thanks
zach v

 

[Indiomonk]

WTB 4 inch lift for my 78FJ40

4 inch lift anyone?

Thanks
zach v

 

[needamod]

Re:does anyone have a front fender

I could possibly use the passenger side if its solid and not dented too bad. let me know. shipping is to zip.55955

 

[MARKUS118]

WTB 4 inch lift for my 78FJ40

I have a pinnacle engineering 4 inch lift on my 12/79 fj40. One year old and in great condition. Has light surface rust. I removed a leaf for better flex but will include leaves that were removed. Make offer. Located in Missouri. (going to a springover)

 

[Indiomonk]

WTB Smog Hoses.. and connector to Air Bypass

This is for my 78 FJ40.
I need, I think 2 small hoses. and the connector that connect both of the hoses to the thingy attached to the side of the driver side fender(AIR BYPASS). I don't need the Smog pump .. But I do need one hose that goes from the pump to the little thingy(AIR BYPASS) on the side fender wall.

To see a diagram look at the bottom of the link at $OR.
http://www.sor.com/sor/cat048b.tam?xax=18539

If you have it $$ awaits or trade for some LC stuff I might have or beer or LC TOYZ or XTREME ROCK Machines (Theze CRAWL).
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3161831967&category=1192

I also have these FJ40 toyz.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6755&item=2445185282

I also have a 1:18 diecast FJ80 (Green).

Yup they are all still new.

Thanks
zach v

 

[amandap]

OEM Toyota one-barrel carb...

OK, here's what I tried to send before.
This carb is from a 66FJ40. Yes,big float window. Nothing is wrong with it as I just had it rebuilt by a reputable guy here in WA. Really, they're pretty simple!. I removed the F engine last month, drained everything properly for storage and it is in a dry, warm garage in eastern WA. Drove it 300 mi to get to my shop(kindof a pita) and it ran great. I live on the west side of the state and have a great shop at the "cabin" on the east side, just to avoid confusion. I haven't started trying to part this out yet, hoping to sell the whole package, but it's time for more parts soo...I've seen some wild prices hi and lo. dunno, make me a fair offer? I've been told these what's also called "non-USA" ?
Where are you? Location narrows it right down for parts swapping it seems.

>

 

[cruiser_guy]

Re:WTB Smog Hoses.. and connector to Air Bypass

I have all that stuff on a '76 2F from a FJ55 if you're interested.

 

[Poser]

OEM Toyota one-barrel carb...

PM me a phone # please.

-Steve

 

[landtoy80]

Re:Center Hubcap 80

I just want one to keep the road salt off the hub.
Where are you located?

 

[informationjunky]

WTB Smog Hoses.. and connector to Air Bypass

[quote author=Indiomonk link=board=6;threadid=8411;start=msg71330#msg71330 date=1070582095]

I also have these FJ40 toyz.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6755&item=2445185282

I also have a 1:18 diecast FJ80 (Green).

Yup they are all still new.

Thanks
zach v

[/quote]
Umm... That is my auction so how do you have them?

 

[Indiomonk]

WTB Smog Hoses.. and connector to Air Bypass

Dude... just used your link on ebay as an example of what I personally own... Sorry.. if it offended you.

later
z

 

[Landpimp]

OEM Toyota one-barrel carb...

Amanda, the carb is not what called Non US, its the dizzy that came in the 66 fj40 that is what called Non US, if it has the little octane adjust dial= non US.

FWIW I think in 67 the 1 barrel went to the small sight glass.

BTW who did the carb re-build?

John H

[quote author=amandap link=board=6;threadid=6548;start=msg71352#msg71352 date=1070584396]
OK, here's what I tried to send before.
This carb is from a 66FJ40. Yes,big float window. Nothing is wrong with it as I just had it rebuilt by a reputable guy here in WA. Really, they're pretty simple!. I removed the F engine last month, drained everything properly for storage and it is in a dry, warm garage in eastern WA. Drove it 300 mi to get to my shop(kindof a pita) and it ran great. I live on the west side of the state and have a great shop at the "cabin" on the east side, just to avoid confusion. I haven't started trying to part this out yet, hoping to sell the whole package, but it's time for more parts soo...I've seen some wild prices hi and lo. dunno, make me a fair offer? I've been told these what's also called "non-USA" ?
Where are you? Location narrows it right down for parts swapping it seems.

>

[/quote]

 

[TJDIV]

Need a Brake Master with two lines.

Need a brake master for my 1970 FJ40. I've re-done the drive train, axles, etc...and would like to replace this as soon as possible. They sell brand new from the dealer, but lets see what we've got here...............


Thanks...Tom IV
TommyIV@COX.NET

 

[Indiomonk]

NEED SMOG PUMP

Buy NAPA I think they are 59 or 69 bucks!

G'd Luck.

z

 

[southerncruiser62]

FJ-60/62 Rear Liftgate

Looking for a FJ-60/62 Rear Liftgate for my 62, anyone have one let me know, alos looking for minor other parts, (i.e. font bumper endcaps, mudflaps all the way around)..

 

[MARKUS118]

FJ-60/62 Rear Liftgate

I have a fj60 lift gate for sale. $50 bucks plus shipping. Good shape! Email me!

 

[REZARF]

WTB: FJ40 Winch Bumper and or roller fairlead

Howdy-

I am on the hunt for a straight winch bumper for an fj40 that will fit the Warn 8274 upright winch. Also, I am looking for a good used roller fairlead.

I would prefer free, but that doesnt get me really far, I will pay a fair price if you have what I need. Surface rust is okay but they must be straight.

Drew <><

 

[Archengine]

WTB: 36x14.5x15 Dirt Grip tires

Got any? If the tread is good, I need soon. Real soon.