Do you know what piece I’m referring to, it is the inside driver side window wipe
that mounts to the upper part of the door panel.
that mounts to the upper part of the door panel.
Wanted FJ60 Manual (60 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
i also have some if you need them
What windshield hinge do you need? Left or right? How soon? I have several of each in the barn at home near Cincinnati but I'm standing in NJ and will be for a few weeks yet...
Nick
Nick
what dims the lights, right? I've got one laying right here next to me from an 85 fj60
if you still need it shoot me $15 via paypal cash and I'll pop it in the mail to you
eschnack@qwest.net
if you still need it shoot me $15 via paypal cash and I'll pop it in the mail to you
eschnack@qwest.net
I have a decent 77 windshield frame for you - can send it with zebrabeefj40 if you buy hinges off him.
PMC swap meet this Saturday 7/9/05
PMC Swap Meet... our 8th year! July 9th
From SF, take Hwy 101 North to E. Washington off ramp in Petaluma, West for 5 miles to the Holy Ghost Hall at 4699 Bodega Ave (E. Washington will turn into Bodega Ave). On the left side... look for the cruisers.
$3 admission or buy a shirt and get in free.
$10 for sellers, $15 if truck/trailer
Contact info is Chris Ward at (707) 579-0888 or Bill Muller at (530) 265-6997
Lots of parts to check out, some vendors on site, food available and raffle!
Gates open at 7 AM for sellers and early birds, plan to wrap up by 3 PM.
Come on out and visit with all your cruiser buddies and help support PMC!
Thanks and see you there...
Copied from Tony's post on Pirate
If you are looking for a part this is a great event to attend. If you can't find what you are looking for ask around as someone may have the part but just did not bring it.
This is a great event and oppurtunity to meet good cruiser folk, check out cruisers, search for or sell parts.
PMC Swap Meet... our 8th year! July 9th
From SF, take Hwy 101 North to E. Washington off ramp in Petaluma, West for 5 miles to the Holy Ghost Hall at 4699 Bodega Ave (E. Washington will turn into Bodega Ave). On the left side... look for the cruisers.
$3 admission or buy a shirt and get in free.
$10 for sellers, $15 if truck/trailer
Contact info is Chris Ward at (707) 579-0888 or Bill Muller at (530) 265-6997
Lots of parts to check out, some vendors on site, food available and raffle!
Gates open at 7 AM for sellers and early birds, plan to wrap up by 3 PM.
Come on out and visit with all your cruiser buddies and help support PMC!
Thanks and see you there...
Copied from Tony's post on Pirate
If you are looking for a part this is a great event to attend. If you can't find what you are looking for ask around as someone may have the part but just did not bring it.
This is a great event and oppurtunity to meet good cruiser folk, check out cruisers, search for or sell parts.
Clutchee
I'm fun sized!
I have a set of 5 chrome 60 wheels ..PM me if interested.
FJ40 apron
you know, the piece that takes up that space between the hood and the fender, where the emblem and side marker are located....
early or late version, doesn't matter...straight would be nice, cheap is even nicer...I've got lights and both early/late emblems to toss on...
mine are a "little" dinged from the barrel roll last October
may as well make it a matching pair too...
you know, the piece that takes up that space between the hood and the fender, where the emblem and side marker are located....
early or late version, doesn't matter...straight would be nice, cheap is even nicer...I've got lights and both early/late emblems to toss on...
mine are a "little" dinged from the barrel roll last October
may as well make it a matching pair too...
Not sure where you are but I have one from a 77 in NJ.
i got pair for $30 shipped. got them off e-bay and I want some w/out marker lites. They were sand blasted and not painted, so they need to be cleaned up a bit. No pitting though. albee
mike
82bj42 1st project
I have a pair from a 77fj40 in good condition. Let me know if you still need them. Thx
albee said:
I'll PM ya
Bench seat frame for Pre 72' fj40
As described above. I just want the frame not the seats. The idea is to fab it for buckets and still be able to use tool box.I have a complete set up for 73' and up bucket seats if someone wants to trade. Thanks
As described above. I just want the frame not the seats. The idea is to fab it for buckets and still be able to use tool box.I have a complete set up for 73' and up bucket seats if someone wants to trade. Thanks
still looking
thanx
thanx
Last edited:
1973 or like fj40 tub with tailgate
Does anyone have a clean 1973 or whatever else would fit fj40 tub with the tailgate for sale. I would be interested if so. No rot please, surface rust would be ok as long as it could be cleaned up. Thanks, RG.
Does anyone have a clean 1973 or whatever else would fit fj40 tub with the tailgate for sale. I would be interested if so. No rot please, surface rust would be ok as long as it could be cleaned up. Thanks, RG.
