Wanted FJ60 Manual (66 Viewers)

[alf]

pick-n-pull

How about a pick-n-pull.

Someone on the web makes headrest lcd's for the 2000+ models have you seen these?

I wonder if they would fit a 1998 or 1999 100 series. I will have to check this out as 100's are a dime a dozen here in the ATL. I probably see 50 a day.

Alf

 

[johnnyb_s]

Where are you located, I have one with a tranny.

Tony

I'm in Va Beach. I PM'd both of you. Thanks again guys!

 

[rockcod]

JohnnyB, I PM'ed you.

 

[lx450landcruiser]

i havent seen those who makes them? what do they cost?
do you have any pics?
i have seen a few of these for different cars but never one for a 80 series and if there is one its prob over a $100.

 

[brandxmgmt]

Need Driver side front turn signal -1973 FJ40

Need Driver side front turn signal -1973 FJ40.
Actually just need the post/bolt if you have one that is busted up. Mine was rusted and snapped on removal. In the LA, CA area.
Thanks...

Eric

 

[WaAkFJ]

WTB: 2f service manual 2f engine and Toyota Trails mags.

I am looking to buy

-a 2f factory service manual

-a 2f engine

-Old Toyota Trails Magazines

Not looking for an expensive 2f engine just one to rebuild. Close to Idaho helps if shipping is too much and price is right....

 

[macgyverFJ62]

Used ome shocks

need some ome shocks

 

[fj40crusher]

85 FJ60 armrest

Need grey, driverside armrest in perfect condition. Rear driverside passenger might work if it fits, not sure.

 

[Bunk_log]

I just picked up a 86 chevy balzer gas tank and it fits up in between the frame rails quite nice and clears the shocks and diff, im SOA.

 

[ec130hamt]

it is the part that connects the two side panels together at the top. the top of the ambulance doors also latch into it.

thanks
jason

 

[In2cruisers]

Think I got a set

I have a set of the old style ( all orange) they are in good condition, Make offer

 

[beanz2]

Is there some drawings of the Cruisers rear frame ends somewhere in the worlwildeweb ?
If the measurements are the same, the 70 series gastank should fit in the rearend of the 40 frame.......

It does. I remember seeing a picture of one South American 40 fitted with a 70/73 series tank and it fits as if it was made for the 40. Who needs a ConFer if we can get an OEM part?


Dave

 

[burnt03]

There's one on ebay right now...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4505855186&category=42611

 

[schlaker]

Fiberglass Cap w/ Rain Gutter

Looking for a cap in usable condition. Needs to be within a couple hours of SF Bay Area.

I have OK H/T sides (some rust) w/ good glass to trade, also have set of 5 like new white spokes 15 x 7.

 

[SizzleChest]

late model hardtop and 4 doors

in good shape

 

[alf]

2000 and up

Try this link:

http://store.aumauto.com/twovideokit.html

 

[Jim S.]

ttt

 

[Scott R]

Got one for a "liftgate series" top already off and ready to be shipped. As always some minimal surface rust is present. Don't know if any difference exists between the amby doors and the liftgate version other then the threaded holes for the lift gate.

 

[johnnyb_s]

Front Side Marker Light Housings

In need 2 front side marker light housings (to fit on a '68 FJ40). Thanks.

 

[84rocktoy]

Stock 1972 FJ 55 Motor mounts

If you have any in good shap please let me know how much shipped to Chico CA 95928
You can also email me to villegasf@tcha.net
Thanks,
Fernando