Wanted FJ60 Manual (64 Viewers)

[macgyverFJ62]

Need FJ62 transer boot cover

Also need brown emergency brake cover

 

[jjbodean1970]

i would try cruiserparts.net for all your stuff, i got a bunch of items from them when i bought my cruiser, little misc odds and ends to put the interior back in stock order, good luck!

 

[Home Built]

I got an entire tub from a 68 that is in great shape and the floors are not rusted out with the doors you want on it too..

asking 300.00 for the tub..

 

[Home Built]

I got one out of a 68 that looks good...

 

[Home Built]

I got 2 of them from a 68 I think they are the same for your year..
I just don't know how to ship something like that.. If you do let me know..
Asking 75 for one and 100 for the other.
I can send you pics of them if you want.

Sean

 

[Home Built]

Got one here with the transfercase for a 400..

http://cgi.ebay.com/ebaymotors/ws/e...&item=7933338514&rd=1&sspagename=STRK:MESE:IT

 

[Home Built]

I got one, can send you pics if you want.
Needs a little work but it's all there..

 

[Home Built]

I got 2 winsheild frames with glass.
can send you pics if you want.

 

[Home Built]

If you are still looking for one I got one here..

http://cgi.ebay.com/ebaymotors/ws/e...&item=7933339849&rd=1&sspagename=STRK:MESE:IT

 

[airon23]

Mr. Manny I just bought a console for an fj60 on ebay and the seller has the same last part of your email "proffittscruisers". Was this you?

 

[trekker]

There is a pair on eBay right now. Sorry don't have the # right at the moment.

 

[trekker]

FJ40 Heater Duct needed

I need one a heater duct piece... here's the picture:

PM me or send an email to 25or6to4@comcast.net. Thanks!

 

[orangefj45]

i might be interested in that tub if mike does'nt want it.

 

[johnnyb_s]

Headlight High Beam Floor Switch

Need one for my '68 FJ40. Thanks.

 

[Landpimp]

what year? I picked up one for cheap at the dealer for my 66 and I think my 82.

 

[mthomp6]

WTB - FZJ80 Wheels

Looking to buy stock wheels for FZJ80 for a trailer project. If have some taking up room in the garage email me: mthomp6@yahoo.com

Thanks.

 

[trekker]

It is for a 68 FJ. I just got a price from the dealer and it is not that bad... The longer piece id the expensive one (No 1.) in the picture.

I just ordered one from the dealer. $20 or so I think. So nevermind! Found one. Thanks!

 

[Blue Chip]

Just replaced mine from JT Outfitters - $60. Easy to do as well. You may want to try someone like Autozone.

 

[esh]

I primed the LCML with a message just so I could find this reference when it comes up every 3 months or so...

---------------------

Reference #1
-----------
Hi Listers,
I thought I would share this info for those FJ62 owners that have
sagging rear hatches.

If you've looked for replacements you probably found that they can
be very expensive, even for the aftermarket parts. I found prices
from $50. for aftermarket to over $100. for OEM. And those prices
are EACH!!

Long story short, I did some serious internet searching and found
that many marine suppliers sell hatch lifts. All you have to know
is the extended and compressed length and the lift rate (lbs).

For my 88 FJ62 the extended length is 17", compressed 11", and the
lift rate is 90#. This may be the same for FJ60s but I can't be
positive.

After checking several places the best deal I found was here:
http://www.shipstore.com/ss/html/GEN/GENGS62760.html

Now the good part. The total price for two, including shipping, was
$46.44. Can't beat that with a stick.

One last item, the ends of these lift supports will go right on the
stock ball joint pins. You will have to remove the original
supports along with the pins, then carefully grind the socket end
until you get the pin free. Reinstall the pins in the hatch then
install the new lift support and your done.
--
Cheers,
Gary mailto:gbjork@d-web.com

Reference #2
------------
(from Steve Crase)
Reid Tool
Part# GAS-124 $14.08ea - 90# lift gas cylinder
Part# GAS-202 $ 2.49ea - metal end fitting
reidtool.com


-Ken

 

[Scott R]

SBC motor mounts for LC

Looking for motor mounts for SBC 350 to Fj40 frame, custom is ok. Anything that works.