Wanted FJ60 Manual (33 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Re: smog pump mounting bracket
I made one more rummage through my storage unit, must have sent it to Brett when I sold him a smog pump last summer!! Sorry!
I made one more rummage through my storage unit, must have sent it to Brett when I sold him a smog pump last summer!! Sorry!
700R4 adapters
Wanted---downey adapter 700r4 to fine spline landcruiser case, which would include the front drive shaft hardware.
toy4todd@yahoo.com
Wanted---downey adapter 700r4 to fine spline landcruiser case, which would include the front drive shaft hardware.
toy4todd@yahoo.com
Re: course spline TC flange (4 spd pattern)
I have no idea what the dimensions are that I need... this is for my new drivelines & unfortunately I am just going off of what they told me I need. :-[
I have no idea what the dimensions are that I need... this is for my new drivelines & unfortunately I am just going off of what they told me I need. :-[
Re: course spline TC flange (4 spd pattern)
You are NOT missing anything... the driveshafts have not arived yet...
easy way for me to do this is to wait for the shafts but I am cutting it close if I am to make the run I want to go on :'( so I am trying to find the flange now so all shows up on my step at the same time.
You are NOT missing anything... the driveshafts have not arived yet...
easy way for me to do this is to wait for the shafts but I am cutting it close if I am to make the run I want to go on :'( so I am trying to find the flange now so all shows up on my step at the same time.
- Joined
- Apr 25, 2002
- Threads
- 23
- Messages
- 203
- Location
- Bella Vista, AR
- Website
- sf4wheel.alloffroad.com
Need Hub Spring
I bought an 85 Toyota mini-axle the other day from a guy locally for my Cruiser brake conversion. When I pulled the hubs off the mini axle I found that one of the springs was broken in 3 pieces. So I am looking for the bigger spring of the two that are in stock Aisin hubs. Does anyone have one that they'd ship to me? I need this badly in order to get the Cruiser on it's feet again. Thanks!
It's the big spring shown in the middle of this picture...
http://www.cascadecrawlers.com/toyota/hubrebuild/Figure 1.jpg
I bought an 85 Toyota mini-axle the other day from a guy locally for my Cruiser brake conversion. When I pulled the hubs off the mini axle I found that one of the springs was broken in 3 pieces. So I am looking for the bigger spring of the two that are in stock Aisin hubs. Does anyone have one that they'd ship to me? I need this badly in order to get the Cruiser on it's feet again. Thanks!
It's the big spring shown in the middle of this picture...
http://www.cascadecrawlers.com/toyota/hubrebuild/Figure 1.jpg
Re: NEW & USED PARTS
There is, was a place in Pocatello ID, B&D enterprises. They were a bone yard for Cruisers, but the guy retired. He is in and out and I try to drop by when I see him there. He is a wealth of knowledge and has parts. I have not seen any activity there in 2 months, I hope nothing bad has happened. I will try to find out what is up and post the info. Maybe we can get him on this site, he has some good parts.
There is, was a place in Pocatello ID, B&D enterprises. They were a bone yard for Cruisers, but the guy retired. He is in and out and I try to drop by when I see him there. He is a wealth of knowledge and has parts. I have not seen any activity there in 2 months, I hope nothing bad has happened. I will try to find out what is up and post the info. Maybe we can get him on this site, he has some good parts.
Re: NEW & USED PARTS
THANKS APPRECIATE THE INFO
THANKS APPRECIATE THE INFO
Re: NEW & USED PARTS
Note on your broken rear hatch handle: CCOT is probably your only source,.... I looked for several months without success. They're made of pot-metal and break easily if you're not gentle with them, hence almost all of them are broken.  oubt you can find a good used one.
Good luck, Maintz
'70 FJ40
Note on your broken rear hatch handle: CCOT is probably your only source,.... I looked for several months without success. They're made of pot-metal and break easily if you're not gentle with them, hence almost all of them are broken.  
oubt you can find a good used one.Good luck, Maintz
'70 FJ40
Re: WTB Jump seat 79+
i sent a mail to you. i want it. where you located?
i sent a mail to you. i want it. where you located?
Re: 71 fj40 radiator
Got one, dunno how good it is. The fill spout is kinda bunged up. Never used it, bought it as a spare.
Can get pics if needed.
Deano
Got one, dunno how good it is. The fill spout is kinda bunged up. Never used it, bought it as a spare.
Can get pics if needed.
Deano
Re: Disk brake axle
Brad,
Missed you at the swap meet at Disney.  id you find a mini front axle yet?
Are you still interested in the soft top?
Deano
Brad,
Missed you at the swap meet at Disney.  
id you find a mini front axle yet?Are you still interested in the soft top?
Deano
- Joined
- Apr 25, 2002
- Threads
- 23
- Messages
- 203
- Location
- Bella Vista, AR
- Website
- sf4wheel.alloffroad.com
Re: Disk brake axle
Brad
Yeah, I had every intention to attend. My little brother called me up the afternoon before and told me he grenaded a CV on his Honda Accord. So I spent all weekend working on his car. I actually found a mini axle in Oklahoma. I bought it off of Dan Gable two weeks ago. I am about 3/4 of the way thru the swap right now. As far as the soft top, I really don't know if I can afford it so close to my wedding (16 days). I will ask the little lady and see what she says. Take care!
Brad
