Wanted FJ60 Manual (7 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
17x8 6 on 5.5 bolt pattern and 1.5" spacers
Would Seqoia rims work? My friend might still be selling some.
Would Seqoia rims work? My friend might still be selling some.
need a hardtop
I know where one is for a 71 but shipping might be to much. Let me know maybe we can work something out.
I know where one is for a 71 but shipping might be to much. Let me know maybe we can work something out.
need a hardtop
I've got one in Roxboro, NC for $100. It needs work, but will keep the weather out.
R.K.
I've got one in Roxboro, NC for $100. It needs work, but will keep the weather out.
R.K.
tags and titles
looking for clean tags and titles
need a early mini truck 85 4x4 prefered.
then a 79 or later fj40 prefer a 79, also interested in frame and tub
and possibly a parts vehicle
then a 78 or earlier, this is the last possible solution.
this is for two different vehicles.
I live in a very hard state to get vehicles titled, and purchased
different vehicles over the yrs from farmers who have decided
to run the vehicles on thier lands and never title them in most cases,
or completely lose them. HUGE pain in the butt for me when i do
decide to street drive one.
It has become easier for me to use a out of state title, and claim the
vehicle as a rebuilt vehicle, get the dang thing inspected (doesnt need to
even be streetworthy for this, i dont understand) but then i just get a
title, have a small extra fee but alot less headaches in the end.
any help please ?
looking for clean tags and titles
need a early mini truck 85 4x4 prefered.
then a 79 or later fj40 prefer a 79, also interested in frame and tub
and possibly a parts vehicle
then a 78 or earlier, this is the last possible solution.
this is for two different vehicles.
I live in a very hard state to get vehicles titled, and purchased
different vehicles over the yrs from farmers who have decided
to run the vehicles on thier lands and never title them in most cases,
or completely lose them. HUGE pain in the butt for me when i do
decide to street drive one.
It has become easier for me to use a out of state title, and claim the
vehicle as a rebuilt vehicle, get the dang thing inspected (doesnt need to
even be streetworthy for this, i dont understand) but then i just get a
title, have a small extra fee but alot less headaches in the end.
any help please ?
tags and titles
might want to look into a titling agency, basicly they can get you an out of state title for your cruiser for around $200 and 6 weeks of waiting. I also herd of another company that will find out whose name is on the title, you could get a new title and get them to sign to seg a new title. E-mail me if you want more info cause i'd have to spend some time looking up the name and phone number of the titling agency
aaronread@readhomes.com
might want to look into a titling agency, basicly they can get you an out of state title for your cruiser for around $200 and 6 weeks of waiting. I also herd of another company that will find out whose name is on the title, you could get a new title and get them to sign to seg a new title. E-mail me if you want more info cause i'd have to spend some time looking up the name and phone number of the titling agency
aaronread@readhomes.com
tags and titles
I have 1978 fj40 boby i am trying to sell complete,tub,fenders,aprons,bib,tank cover all in fair condition.Hood and windshield frame with new glass in good condition.Asking $750 w/o frame and $950 with.Body is located in ohio and i have clear title and good readable vin tag. Have pics if interested.Will ship at your cost or possibly work out delivery, meet halfway for agreed upon amount depending on location.
I have 1978 fj40 boby i am trying to sell complete,tub,fenders,aprons,bib,tank cover all in fair condition.Hood and windshield frame with new glass in good condition.Asking $750 w/o frame and $950 with.Body is located in ohio and i have clear title and good readable vin tag. Have pics if interested.Will ship at your cost or possibly work out delivery, meet halfway for agreed upon amount depending on location.
TJDIV
UP of MI.
I need a 3 speed tranny
Anyone Else? I'm running into some serious trouble getting this thing on the road. I ONLY need the 3 Speed Tranny to have my 45 Wagon "rollin'". Email me.
TommyIV@cox.net
Thanks.
Anyone Else? I'm running into some serious trouble getting this thing on the road. I ONLY need the 3 Speed Tranny to have my 45 Wagon "rollin'". Email me.
TommyIV@cox.net
Thanks.
I need one.....
Down in Moab this weekend I saw this awsome cruiser, it had a grill/bezel( whichever) That was chrome but it had the new toyota emblem on it.....anyone ever see one of these or know where to get one????
Down in Moab this weekend I saw this awsome cruiser, it had a grill/bezel( whichever) That was chrome but it had the new toyota emblem on it.....anyone ever see one of these or know where to get one????
I need one.....
a corolla
malphrus
a corolla
malphrus
Wanted: Misc FJ55 parts
Need a pair of front and rear bumpers. Would like them
to be straight but as straight as possible would be ok too
surface rust is ok also
Also need a battery for same truck. Or at least one that
i can fabricate a duplicate from. So if it is not perfect but
all together that would be ok as well....
Thanks
JimK
Oh yeah sorry i am located in Portland Oregon. zip 97236
Need a pair of front and rear bumpers. Would like them
to be straight but as straight as possible would be ok too
surface rust is ok also
Also need a battery for same truck. Or at least one that
i can fabricate a duplicate from. So if it is not perfect but
all together that would be ok as well....
Thanks
JimK
Oh yeah sorry i am located in Portland Oregon. zip 97236
FJ40JOHN
SILVER Star
80 series stuff
Anyone know of where I can find a rolled 80?? I want the entire drivetrain out of one. dont care about the body at all. about how much is the whole setup going to run me??
Anyone know of where I can find a rolled 80?? I want the entire drivetrain out of one. dont care about the body at all. about how much is the whole setup going to run me??
91-97 FJ 80 coils
I have a 94 4runner with the usual saggy rear. I'm thinking about getting rid of the sag and lifting it an additional 2 inches or so with some cruiser coils. Anybody have any rear coils from a 91-97 FZJ-80? I understand they come with different lengths for both sides, so i guess ill need 2. Let me know if you can help me out.
Thanks.
Shawn
I have a 94 4runner with the usual saggy rear. I'm thinking about getting rid of the sag and lifting it an additional 2 inches or so with some cruiser coils. Anybody have any rear coils from a 91-97 FZJ-80? I understand they come with different lengths for both sides, so i guess ill need 2. Let me know if you can help me out.
Thanks.
Shawn
Factory Reciever Hitch for 80 series
I need one of these just to carry the bike rack. I assume its a 2 inch reciever. Let me know if you have one laying around. Thanks.
I need one of these just to carry the bike rack. I assume its a 2 inch reciever. Let me know if you have one laying around. Thanks.
Wanted 1977 fj40 repair manuel
I am looking for a 1977 toyota land cruiser fj40 repair manuel. Are they worth it?
you can e-mail me at aaronread@readhomes.com
thanks
aaron
I am looking for a 1977 toyota land cruiser fj40 repair manuel. Are they worth it?
you can e-mail me at aaronread@readhomes.com
thanks
aaron
17x8 6 on 5.5 bolt pattern and 1.5" spacers
not sure, what are the BS on them...what style is it?
...oh and price for 5 (they must all be identical for 5 tire rotation)
thanks!
k
not sure, what are the BS on them...what style is it?
...oh and price for 5 (they must all be identical for 5 tire rotation)
thanks!
k
alia176
SILVER Star
Re:91-97 FJ 80 coils
I have a set of '96 FZJ 80 cruiser oem coils that I took out. Think you might want that set? I'd like to get rid of the whole set (qty 4) if possible to free up some shelf space!
Let me know.
Ali
I have a set of '96 FZJ 80 cruiser oem coils that I took out. Think you might want that set? I'd like to get rid of the whole set (qty 4) if possible to free up some shelf space!
Let me know.
Ali
