Wanted FJ60 Manual (3 Viewers)

[zetasig]

fj 40 frame

This guy I think still has one in Kent OH, AKron area. I think it is a 78 also almost perfect from what I remember.

jetfuelburner@msn.com

Guys name is Mike. good guy to work with. he is a pilot, hense the jetfuelburner.

Good luck.

 

[lumberjack]

1991 Fj80 Radiator

Hey All

I am looking for an entirely brass aftermarket radiator to fit a 1991 fj80, I do not want the stock one that has the plastic top and bottom . I am looking for one that would work fine
with my 3FE but eventually work with a V8 as well. I hope to change the motor out in a year or so. If anyone one has a fairly new radiator to these requests that would be great.

Thanks

 

[FJ40JOHN]

FJ40 Tube fender options

metal techs stuff is SWEET.....


shortys offroad will have some sometime in the next few months.....

 

[FJ40JOHN]

SHOCKS.....Give me shocks....

how about some stock length Monroe Sensatracs?? they are near new, but are dirty and have a couple of dents in them, but work fine.

 

[Cruiserhead05]

Fj80 add ons wanted

This summer i may be given my moms 80 series with lockers and am looking for the following to add on but wont be able to buy until this summer:

1- lift
2- all terrain or mud terrain tires
3- winch
4- bumper which can hold winch.
5- cd player

 

[cruiser_guy]

Re:OEM 10mm x 12mm wrench

bump

 

[zipp]

OEM 10mm x 12mm wrench

Do you have a pic of the wrenches? I think I have a 10x12, but I don't know what style it is. I don't even know what vehicle it came from- because I think my father has had it for 20+ years. I can take a look tomorrow.
Zipp.

 

[IDave]

OEM 10mm x 12mm wrench

Here be what I've got:

 

[cruiserwanted]

1970 FJ40 parts WANTED

I just bought a 70 FJ40 and need some parts. Need lighter with working bulb or anyone know where I can get a bulb and how to change it in the lighter?? 1 Rim with clips for hubcap. 40/60 front bench seat. speedometer gauge all other gauges work just do not know how fast I am going. rear seat belts. front bumper and toyota back emblem. Thanks for all your help. IM or e-mail me with price any pics are appricated also.

 

[Cajunboy]

'72 FJ 40 F155

Looking for a double crank pulley, probably will have to come off a 2F engine. Also a good valve cover for the F155.

 

[Cajunboy]

'72 FJ 40 F155

I'm doing a PS convesrion and I need the dual crank pulley to make it happen. I'm also looking for confirmation the 2F crank will work on the '72 F engine.

 

[TJDIV]

Re:1970 FJ40 parts WANTED

check your email.

 

[fr8train]

Hard top or soft top and doors.

Cold is coming and I only have a bikini top for the '71. Anyone have anything in/or around Maryland?

 

[willsta2000]

'72 FJ 40 F155

Don't know about the crank,... but you will want to get the cast aluminum valve cover,... no more problems w/ oil leaks.

 

[cruiser_guy]

OEM 10mm x 12mm wrench

These are the only OEM wrenches I have! I didn't know they came in other sizes besides 10mm x 12mm and 14mm x 17mm. I'll broaden my wish list to any OEM wrench other than the 14mm x 17mm which I have.
Sorry for the poor picture. No digi cam just a scanner. Top wrench is like the second from top in IDave's picture.
IDave, is that bottom wrench a 21mm x 25mm!?!? I've never turned a 21mm or 25mm nut on a 'Cruiser ???!
I've done 19mm, 22mm, 24mm and 27mm but nothing in between.

 

[IDave]

OEM 10mm x 12mm wrench

It's a 21 x 23! I don't know what it fits, either. But, there it is.

Maybe it's for working on your friend's h**p when you're out wheelin'.....

 

[Landpimp]

OEM 10mm x 12mm wrench

How about a call to the dealer......you can get em all new for not alot of $$

pic of the tools, the wrenchs came in a cliped set

or Ebay, I have bought a dozen single OEM wrechs over the years, one just showed up today, paid $2.50 for it including shipping.

you can still get OEM grease guns as well but they are different than the old OEM ones. Also wheel chocks......

pic of my un-used OEM greese gun, this is the original style, new ones are not the same

I have a complete NEW tool kit that came in my mustard 82 fj40, all the tools are in the bags with part numbers, at some point the 40 was stolen......ran out of gas within a few blocks, the kids took the tool kit, owner made the insurance company buy him all new tools(and bag) over $200 for all of it.

early tool kits came with other tools the latter ones didn't.

Can still get OEM drop lights, like $25

can't get these anymore (these are new and never installed)

how about an OEM gas can?

how about a OEM TEQ marked metal tool kit from the 1960's with the tools still in cosmisline/plastic/paper?

and hows this for a RARE option(not sure it ever was really avaible in the US, but its in a US parts book)

 

[IDave]

OEM 10mm x 12mm wrench

John, I check ebay every day looking for these things. Missed the wrench you say you found. What catagory? I'm not seeing it, even under completed items.

You are making me jealous. I may have to drive over your way and steal your collection! 8)

 

[IDave]

OEM 10mm x 12mm wrench

Oops. Just remembered thievery is a sore point with you. I was just joking of course, no intention to offend.

 

[ajfriz]

wanted

I need a h55f transmission along with fenders and running boards for my 78 FJ40. If anyone has any of these items please email me at ajfriz@hotmail.com