Wanted FJ60 Manual (17 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I think I have what you're looking for. Send me an e-mail and I'll send a photo to ensure it's what you need.
 
Lcah

I didn't have any troubles with contact, he sent me the info I needed via e-mail quickly, couple days at most, and I managed to contact first try by phone.

I ordered u-bolts from him too, they were the standard Rancho u-bolts, not anything special, I trimmed them off with the abrasive cutoff wheel after assembly. His price was OK, you might research what price you can get u-bolts for, in advance of speaking to him. Then decide when you hear his price.

My total for the plates, u-bolts, shipping, etc. was $190.

Just teasing about the valve cover. You'll just get that much more dust and congealed welding smoke for free!
 
TTT. Seems Simon has fell off the face of the earth, and I really need a carb to send to the propane guy. I even sent Simon a few extra bucks, but don't really care, I just need a damn adapter so I can run propane.
 
Would you be interested in some off my '74?,... I'm unaware of any difference.
 
Here's the email of a guy who makes 'em real close by me. (I got mine from him) IIRC ~ $180
jeepdude@bentonrea.com His name is Jay.

Good Luck!
 
Headrest for Stock Bucket Seats 1975 FJ-40

Looking for the driver and pass headrest for my stock buckets that are in my 1975 FJ-40

I know they have the narrow posts and that the newer/wider ones will not work.

PM me at my email if you have some

jacobw_25@yahoo.com

Thanks
 
i need 15 passenger van!!!!

ok so i'm lookin for a people hauler for the sept 21 to oct 5 time frame.... the rental place wants $1500 for limited milage.... i need this thing to make it from Omaha Ne to EauClaire Wi and back..... any one got one for sale cheep or willing to rent for (less than the $1500)


i am really lookin for a 3rd cruiser to buy but the $$ just isn't there... so if you've got a good running 55 or 45lv for less than $3k (hey if i'm buying i'll pay more than 1500) i'd be real interested


also while i am dreaming i'd like a reallly high paying job that only takes like 12 hours a week :D :D :D



dan
 
Wanted - cold air intake hose 84 fj60

E-mail me (calemail@yahoo.com) if you have a cold air intake hose for an 84 fj60 (no cracks) for sale. I know where to get one for $90 but I'm looking for a cheap replacement.

PNWFJ
 
wanted-73 fj-40 temp gauge

Looking for a temp gauge for a 73 fj-40. I guess the temp gauge is specific to the 73, so as far as I know, it is the only one that will work.
 
emissions rams horns for sbc

need some late model rams horns for my 60.

let me know

thanks,
Branden
 
brake cylinder caps and floats

I have a 7/70 FJ40 that currently has black electric tap for covers on the brake cylinder. It has not been registered since 93 and has probably sat since than. Anyway the electric tape is not going to work. I need caps and floats for both reservoirs. Thanks.

:cheers:
 
Wanted: OEM Passanger Side Step for FJ40

Wanted: Passanger Side step for a '73 FJ40. I am loooking for one in good straight condition.

Attached is the driver side step I would like to match.
 

Users who are viewing this thread

Back
Top Bottom