FJ60 and FJ62 Parts Available

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

iortechnology

iortechnology

10 Year 15 Year
Joined
Jul 16, 2007
Threads
14
Messages
97
Location
Albuquerque, New Mexico
Location
United States
I have a 1988 FJ62 that I am parting out. Best to shoot me an email at brandon@iortechnology.com if you are interested, or you can PM me here at MUD.

The parts are all coming off of a desert southwest 1988 FJ62 and are virtually rust free. I'll include pictures of the parts as well. All parts are located in Albuquerque, NM 87109 for shipping. Let me know if there are other parts you are interested in on the vehicle as well, but here is a good start on the big parts. All prices shown do not include shipping but I am happy to combine for multiple parts:

8/80-1/90 FJ60 or FJ62 hood rust free and straight $150
8/80-1/90 FJ60 or FJ62 roof panel rust free and straight $200
8/87-1/90 FJ62 front PS outer fender $125
IMG00023.webp
IMG00063.webp
rust free roof.webp
 
9/88-1/90 FJ62 DS rust free and straight 'A' pillar $75

8/87-1/90 FJ62 PS rust free and straight rear door (sheet metal only - no internal parts other than glass shown) $200

8/87-1/90 FJ62 PS rust free and straight inner front fender $100
IMG00013.webp
dspillab.webp
IMG00052.webp
 
8/87-1/90 FJ62 PS front door skin only (no electronics) rust free $200

8/87-1/90 FJ62 DS front door skin only (no electronics) rust free (small ding in window frame at top corner as seen in picture - does not seem to affect the window working, but there is a little bend in the channel) $150

8/87-1/90 FJ62 DS rear door skin only (no electronics) rust free $200
IMG00028.webp
IMG00036.webp
IMG00056.webp
 
If interested, send an email to brandon@iortechnology.com or PM me here on MUD. Thanks!

8/80-1/90 FJ60 or FJ62 PS 'A' pillar no rust straight $75
8/87-1/90 FJ62 front driveshaft (automatic transmission) $100
8/87-1/90 FJ62 rear driveshaft (automatic transmission) $100
ps a pillar.webp
IMG00065.webp
IMG00067.webp
 
If interested, shoot me an email at brandon@iortechnology.com or PM me here at MUD.

8/87-1/90 FJ62 Front anti-sway stability bar $35
8/87-1/90 Radiator Support (left, right supports and bottom support as shown) $100

8/80-1/90 FJ60 or FJ62 radiator mounting bracket pair $20
front antisway bar.webp
IMG00040.webp
radiator mounting brackets pair.webp
 
senatedestroyer said:
how bout the back door? and do you still have the ps fender?
Click to expand...

I do have the back door, both the lift gate and the tail gate (assuming that's what you are after). I'll post some pictures for you to see.

Still have the PS fender inside and outside.

Send me an email at brandon@iortechnology.com for a quick reply.
 
jeepgod said:
How are the springs and cost.
Click to expand...

As far as I can tell, the springs are all good, but they will be towards the end of the items that I'll get out so that I can still move the chassis around. Shoot me an email at brandon@iortechnology.com and I will let you know when I'm ready to get them out of here.

- Brandon
 
I'll post more pictures of parts tomorrow. My wife and I had a baby show up about 2 weeks early so it has been a little busier than normal. All PMs should be answered now.

I have the engine for this FJ62 if anybody is looking to do a 3FE swap or want to do the EFI conversion themselves. I have the motor stripped down to the block right now, with all of the parts in plastic bins ready for cleaning and reassembly. I'd like to get the whole thing to somebody who wants to do a rebuild and conversion, but if there is interest in parts, well I'm game for that too. The speedo showed 152K miles but the previous owner had sold the distributer and ECU so I never heard the thing run. I have the rest of the parts.

Pictures tomorrow! brandon@iortechnology.com gets questions to me fastest.
 
Buddy Sue said:
do you still have radiator bracket if so how much and shipping to 31763
Click to expand...

Are you talking about the radiator brackets that I have a picture of here on this post? If so, yes.

If not, what number in SOR? I probably have it/them.

- Brandon
brandon@iortechnology.com
 
Anybody interested in a power steering box from this FJ62? The one that I pulled the other night is ready to box up if anybody is interested. $100 shipped takes it. No leaks apparent on the box and it doesn't have slop in it as far as I can tell. Comes with the pitman arm attached.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom