Wanted FJ60 2F STOCK INTAKE/EXHAUST MANIFOLD WANTED IN SO. CAL

[fjforme]

Vehicle Model

1. 60 Series

Looking for stock intake/exhaust manifold for a 1985 fj60 2f motor. In so cal preferred. I’m in LA. Or if you can ship that’s fine too. Thank you

 

[mattressking]

I've got a very nice combination - what's your timeline for need? I'd have to remove from my running motor right now.

 

[ToyotaMatt]

Looking for stock intake/exhaust manifold for a 1985 fj60 2f motor. In so cal preferred. I’m in LA. Or if you can ship that’s fine too. Thank you

i offer both a traditional Carbon Steel Down Pipe mounting Flange Kit

and

a New Modern Age 2024 Stainless Steel one as well

both are water jetted to precises' OEM original spec's

i DO bump up the thickness gauge one size Spec. for all the right reasons you can think of , you CAN use the stock oem manifold studs still if you so chose to


all my included hardware and gasket are 100% OEM Japan Spec. Parts .....fyi

thanks
.

Carbon Steel 2F Exhaust Manifold Flange Down PIPE KIT 1/75 -1987 FJ40 FJ60 FJ55 OEM TOYOTA Genuine Parts Updated Upgraded Special Unique Hardware TORX STuds and Locking Flange Nuts ( 3-BOLT FLANGE WATER JETTED IN-HOUSE ) - VintageTEqParts.com

OEM TOYOTA Genuine Parts FJ60 2F Engine Updated / Upgraded Exhaust Manifold to Front Down Pipe Gasket and Special...

vintageteqparts.com

.

The Evolution of the 3-Bolt FLANGE 2F Engine Exhaust Manifold Front Down Pipe Has Taken one Giant Leap to .304 Stainless Steel and 10mm THICK ! - VintageTEqParts.com

- The Evolution of the 3-Bolt FLANGE 2F Engine - Exhaust Manifold Front Down Pipe Has Taken one...

vintageteqparts.com

/

 

[fjforme]

Looking for stock intake/exhaust manifold for a 1985 fj60 2f motor. In so cal preferred. I’m in LA. Or if you can ship that’s fine too. Thank you

Pm sent

 

[fjforme]

I've got a very nice combination - what's your timeline for need? I'd have to remove from my running motor right now.

 

[fjforme]

Still looking

 

[65swb45]

What’s wrong with yours, and do you really need both manifolds?

 

[fjforme]

the gasket broke. Previous owner drove it for a long time so the exhaust part is burned off won’t seal Cutting it doesn’t help either

 

[65swb45]

I have this really nice one available for counter sale only. Disassembled, cleaned, resurfaced, desmogged, reassembled and run for a short period on a rebuilt engine before the PO decided it still wasn’t enough power and did an engine swap. $950 out the door.

 

[65swb45]

 

[fjforme]

Are you the guy in Burbank ?

 

[65swb45]

Yes.

 

[fjforme]

Few years ago I came into your shop needed a shifter bracket. You told me $175 cash. I had $170 cash so you told me to go get the rest. I had to drive back home to get $5. To buy the bracket. Not a fun experience. Thanks for the offer.. but I’ll pass.

 

[fjforme]

Still looking.

 

[65swb45]

Fair enough. GLWS.

 

[Yotajeff]

I have a few nice sets ready to go in Pasadena if you're still looking. Shoot me a text or call 818-900-8321