fj45swb

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 11, 2004
Threads
182
Messages
2,250
Location
Kansas!
i am just getting started in the fj45 area so go easy on me fella's...i just have a couple of questions.....for now:D .... are the majority of 40 parts interchangable with the 45?...i have searched and read about everything i can find on the fj45swb and can't seem to find what is and what isn't interchangable...the parts i am most interested in are axels...springs....that type of part....is there a site that would identify factory colors for these vehicles?.. perhaps a history site?thanks

osagecruiser
 
For the most part you'll find the 45 parts the same as an FJ40 of the same vintage. The spring would be the same as you would find on an FJ45 wagon. The frame is the same as a 45 wagon as well with a few exceptions. I haven't added the 45 pickup information to root45 yet but I plan to. I do have some factory scans up of the swb if that helps.

http://www.root45.com/gallery2/main.php?g2_itemId=845
 
thanks tree and johnny...i have been to the route45 site...very well done and informative....i will anxiously await the addition of the 45 pick up to the site....i will be picking up my 45swb next weekend...i am anxious to get it home and start planning the repairs....some of the work i have seen on these trucks and the wagons is great!...thanks

osagecruiser
 
Also from what I understand the front springs are the same length, etc. from a FJ40, however the rear springs are a different length. Most body stuff up front is interchangeable from the firewall forward, also doors, windshield frames, all of the obvious. One thing is the early / late thing... the SWB was I think imported from 63-67 therefore the early doors etc is what you'd be after. I've got some good pics if you'd like me to email some to you.

Take care!
 
mule
thanks...yes please email pics....i restored/updated a 1968 fj40 for my son....and now we are going to work on the truck together...thanks for the reply i will check out the site you linked

osagecruiser
 
mule
thanks...yes please email pics....i restored/updated a 1968 fj40 for my son....and now we are going to work on the truck together...thanks for the reply i will check out the site you linked

osagecruiser


Nice roadtrip again!

You could always stop by colorado again ;)
 
hey ben
we are actually going through colorado....gonna make a stop near estes park so my son can visit a friend while we continue north to wyoming...gonna pick jake up on the way back through colorado....weather permitting...next weekend

osagecruiser
 
you are basically going right by me :D again...You will probably be on I-25 which is about 30 minutes from greeley. I'll be around, my dads in town. So if you need anything or get in trouble you have my number. Or you can PM me for my number again.

I've got that 45 you can look at now ;p good pic opportunity.
 
ben,
thanks please pm me your phone number....i would stop just off the interstate if you are willing to drive out and say hi...and yes it would be a good photo op....we are all set for next weekend...i just hope the weather cooperates!...thanks for offering up your phone number and assistance if needed

osagecruiser
 

Users who are viewing this thread

Back
Top Bottom