FINALLY after 2+ years......GREAT!

[mrjay2u]

After two years and 5 monthes I finally got my '67 running again. But after a brief 2 miniutes I noticed my water pump pouring out water from the pulley end of the pump. I have been to the parts store, etc. and they only go back to 1968, so after two hours of typing in every phrase with 'water pump' in it on the search line here I decided to ask. Can I put a water pump from a '68 or newer 1F motor on my '67? I posted a pic of what i currently have. Any and all input is greatly appreciated.

Also you may notice that my thermostat cover has broken ears. Does any one know where to go to replace this?

 

[Southeast Overland]

Do you just need the upper half of the housing? I believe I have a good one - is for a 2F though.

Not sure about the water pump for an F. (I have a 2F one).

Check with SOR - they usually have pretty good info on line in their catalog.

 

[Mtrunner]

PM'd you...

 

[71cruiser71]

im running a 72 water pump on a 67 block. just have to make sure you have a early style thermostat housing, (the tall style). oh btw also running a 72 head on the 67 block. hope this helps.

 

[mrjay2u]

AWESOME! Just the type of info I needed. Thank you.

im running a 72 water pump on a 67 block. just have to make sure you have a early style thermostat housing, (the tall style). oh btw also running a 72 head on the 67 block. hope this helps.

 

[mudmaster]

What did you end up doing??