For Sale Feeler - 80 Series headlight washing system

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

gofast

gofast

SILVER Star
10 Year 15 Year
Joined
Jun 27, 2007
Threads
282
Messages
2,137
Location
Peachland, BC
Location
United States
80 Series headlight washing system

I have the complete system from a JDM 81 series cruiser inclusive of relay, hoses, nozzles, and washer bottle. I have also purchased the factory dash switch for a 1997 and the charcoal canister relocation bracket.

Looking at my time, I may never get the chance to complete this project.

Washing system $200
Landtank canister relocation bracket $115
Factory Switch $50.00

The system came with the 91-95 curved dash style switch. I've modified the connector to work in the 97 style switch but it should still work with earlier switch



Looking to get $300 not including ride. Shipping is 48.00 anywhere in North America

example install here:https://forum.ih8mud.com/80-series-tech/497472-jdm-headlight-washer-retro-fit-landtank-charcoal-canister-bracket-install.html

Cheers,

John
 
Last edited:
070.jpg


069.jpg


072.jpg
 
I could be interested... Will this work/fit properly in a 1994?
 
Yes it would . All components would work and in fact the original switch would fit your dash nicely. This is a factory set up that fits 91-97 regardless of switch type. If you had a 91 and 92, I don't think you need the charcoal canister relocation bracket though.
 
buy your truck a christmas present
 
PM's replied to
 
I replied to your PM. I assume this system has been tested and is in working condition. Tank not cracked or any other leaks, etc. Please confirm.
 
All parts are good and function and this came from a working JDM truck - I originally purchased this from G&S cruisers.

Tanks do not leak and are in good shape. One of the rubber seals where the motor penetrates the tank has been stretched - resting up against the relocation bracket in the box I was storing it in. Its drippy - not constant - but should be removed and siliconed in place.

Noozles shoot water

The worst of it is the factory connector to the switch. I filed it down to fit the 1997 switch. It should still work fine and fit for the pre 1995 switch though. You would have to tape the two connectors to ensure it would hold as I removed the locking pin on the pig tail to fit the 97
 
Last edited:
PayPal sent ;)
 
Package has been sold
 
You must log in or register to reply here.

Share this page

Back
Top Bottom