Face separation cable

[egil1963]

I need a face separation cable for an Icom ic-2710h, does anyone know of someone that might have one. they have been discontinued by the manufacturer and are not available even through icom.

thanks
John

 

[CV Kurt]

I need a face separation cable for an Icom ic-2710h, does anyone know of someone that might have one. they have been discontinued by the manufacturer and are not available even through icom.

thanks
John

Did a couple of web searches, looks like the OPC-600 and OPC-601 cables were replaced with the OPC-600R and OPC-601R cables, respectively. Both of these cables seem to be available.

IC-OPC600R - Icom - HamCity / Ham Radio Equipment - HamCity / Ham Radio Equipment

Hamcity seems to have the OPC 600R for $45, and lists it as being compatible with the IC-207H.

-- Kurt

 

[egil1963]

Opc-438 & opc-439

The 600 series cables according to the manufacturer are not the same. Above are the cable part # from the manuel.

 

[egil1963]

ic-2710h is different than the model you are mentioning.

 

[egil1963]

I just went to hamcity and took a look, it indicated that it will work, I will check into this and get back with you, thanks for the lead.

 

[rusty_tlc]

I just went to hamcity and took a look, it indicated that it will work, I will check into this and get back with you, thanks for the lead.

I'd encourage you to pick up a phone and call them, they are very knowledgeable and a call may help you get the right thing the first time.

 

[egil1963]

that will be the plan on friday, thanks for the heads up.

 

[egil1963]

All is good, from Ham City, the IC-OPC600R is compatible to my radio and what I want to do. Thanks to all for your input and guidance.