EVO Corse DakarZero Picture Hunt (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

jdha777 said:
I know these weren't the black ones the OP was interested in but perhaps I can change their mind...

I finally got the wheels mounted and wrapped in the Toyo Open Country AT3s. I love the setup even without a lift and the tires sit flush with the fender edge. There is some increased firmness of the ride with the LT tires and subtle road noise (hum/whine) which is to be expected but hardly a bother. Overall I'm very pleased with the results although the center cap lettering is more of a gold rather than bronze (still sorting this out). I hope this gives you a better idea of what to expect if you were considering purchasing them.

View attachment 2676130



View attachment 2676132

View attachment 2676157

View attachment 2676158
Click to expand...

Looking good! I emailed them about the centre caps. The land rovers bolt pattern and centre bore has the best caps but the hub doesn't stick out as far. Wish they matched the colour of the wheels a bit better but its way more subtle.

They said they are aware of the lack of options. Some hubs stick out quite a bit so they basically design one size to fill all. The hubs on my 2nd gen Sequoia likely wont stick out past into the wheel centre bore but the only caps available is one that sticks out. They said there isn't enough demand to make more caps but it would be nice if they had one that was a little more shallow.

Still waiting on my set!
 
paulunm said:
Looks great!

These are the et45 right? I've been planning to go with those but in et30- you have me questioning that now... Mind taking more pics from the side to show flushness with the front and rear fenders?
Click to expand...
Yes they are +45mm offset. Not sure if these are what you are looking for but here are a few down the line shots. The outer edge of the front tire upper sidewall sits flush with top fender edge. On the rears the upper sidewall sits inboard by a few millimeters.

20210522_133853.jpg


20210522_133912.jpg


20210522_133924.jpg


20210522_133935.jpg
 
Last edited:
jdha777 said:
Yes they are +45mm offset. Not sure if these are what you are looking for but here are a few down the line shots. The outer edge of the front tire upper sidewall sits flush with top fender edge. On the rears the upper sidewall sits inboard by a few millimeters.
Click to expand...
Fantastic, thank you for the additional pics- and I THINK you just confirmed I can get away with the et30 (15mm more outboard). Same as the OZ that some have here.

Should be hella flush :cool:
 
Mine finally came!

Two of the four were damaged, the other two are ok though. One of the two that are damaged had a big scratch but is only on the backside of the wheel and maybe I can live with that.
D7945DBF-29D3-4DD6-8FF1-B34714C4052A.jpeg


The other one has a gouge out of the front outer edge and thats the one that stings.
3FB632A7-FFAE-4D4C-BF1D-A5AE32FEE71E.jpeg

DEE4B903-5D08-4508-BDAE-C9FCF605D900.jpeg

4EA01958-44F4-4A22-8F2F-4AA5A80944DE.jpeg


These were mad money, for me at least and it’s hard to just accept it.

I also ordered matte black but the dealer sent me glossy which already has a bunch of micro surface scratches :(

They look absolutely stunning but I wanted matte...
E64E669B-9912-49DF-AFED-12458C77F721.jpeg


There’s only one dealer for all of Canada I believe and maybe its to be expected since these travel so far but after waiting so long, and the price, its quite disappointing.

I’ve let the dealer know yesterday but he didnt respond to my email that I let him know I received the tracking information earlier in the week which seemed a bit odd, like he knew they were damaged.

I haven't yet reached out to evo, I’m waiting to hear from the dealer before I seek help from them.

I’m not really planning on wheeling these yet as this is our daily driver family wagon so it’s not like I’m going to be scratching these up myself in the first few weeks.

What would you guys do, am I overreacting?
 
OshawaLX said:
Mine finally came!

Two of the four were damaged, the other two are ok though. One of the two that are damaged had a big scratch but is only on the backside of the wheel and maybe I can live with that.
View attachment 2695202

The other one has a gouge out of the front outer edge and thats the one that stings.
View attachment 2695206
View attachment 2695208
View attachment 2695211

These were mad money, for me at least and it’s hard to just accept it.

I also ordered matte black but the dealer sent me glossy which already has a bunch of micro surface scratches :(

They look absolutely stunning but I wanted matte...
View attachment 2695216

There’s only one dealer for all of Canada I believe and maybe its to be expected since these travel so far but after waiting so long, and the price, its quite disappointing.

I’ve let the dealer know yesterday but he didnt respond to my email that I let him know I received the tracking information earlier in the week which seemed a bit odd, like he knew they were damaged.

I haven't yet reached out to evo, I’m waiting to hear from the dealer before I seek help from them.

I’m not really planning on wheeling these yet as this is our daily driver family wagon so it’s not like I’m going to be scratching these up myself in the first few weeks.

What would you guys do, am I overreacting?
Click to expand...
I don't think you are overreacting at all. You paid for new and you should expect new condition wheels. The matte finish would be a big deal to me as well. I assume your specified order is well documented and I hope the only cost to you is time.

My wheels came thru Mainland Overland (USA) and were all in perfect shape. The boxes were well packed from factory and could withstand some abusive transit. The box damage you shared is so frustrating.

I hope you get what you want or a substantial discount; a return shipment would not be cheap.
 
jdha777 said:
I don't think you are overreacting at all. You paid for new and you should expect new condition wheels. The matte finish would be a big deal to me as well. I assume your specified order is well documented and I hope the only cost to you is time.

My wheels came thru Mainland Overland (USA) and were all in perfect shape. The boxes were well packed from factory and could withstand some abusive transit. The box damage you shared is so frustrating.

I hope you get what you want or a substantial discount; a return shipment would not be cheap.
Click to expand...


Black was the only option on his site, no glossy or matte option but I specified in email a few times and he basically set up the order link and sent it to me. Return shipment would be expensive but that would be a best case for me. Maybe they discount the value of a repair but I’m hoping the re-ship is the resolve. I will go through the hassle of sending them to get a clean set. The glossy look good but its hard to say without seeing the matte next to them.

I have an appointment to get them mounted on Monday, probably will cancel and wait it out...
 
OshawaLX said:
The site I ordered from was in french but there was

Black was the only option on his site, no glossy or matte option but I specified in email a few times and he basically set up the order link and sent it to me. Return shipment would be expensive but that would be a best case for me. Maybe they discount the value of a repair but I’m hoping the re-ship is the resolve. I will go through the hassle of sending them to get a clean set. The glossy look good but its hard to say without seeing the matte next to them.

I have an appointment to get them mounted on Monday, probably will cancel and wait it out...
Click to expand...
Seems like it would be the carrier that would take the hit provided vendor purchased insurance on the shipment.

I agree that the gloss looks good too! The damage on the inside of the one wheel would not bother me as long as I got appropriately compensated for the damages. The gouge on the outer rim can be repaired but I would push hard for replacement.
 
jdha777 said:
Seems like it would be the carrier that would take the hit provided vendor purchased insurance on the shipment.

I agree that the gloss looks good too! The damage on the inside of the one wheel would not bother me as long as I got appropriately compensated for the damages. The gouge on the outer rim can be repaired but I would push hard for replacement.
Click to expand...
Agreed.
 
Anyone have any wheel lock recommendations for these wheels? I have a set of mcgards #24220 but I think they are too long. #24216 are a bit shorter but I think they might sill look too long.
 
OshawaLX said:
Anyone have any wheel lock recommendations for these wheels? I have a set of mcgards #24220 but I think they are too long. #24216 are a bit shorter but I think they might sill look too long.
Click to expand...
Mcgard 65515 (BK for black color) is the full set of spline lugs (x16) and comes with locking nuts (x4). 65315 is the part number for a single set (x4) of the spline lug nuts. I didn't want any of the locking nuts so I ordered 5 sets of the single pack spline nuts, which is actually cheaper too!
 
Anyone order the Silver EVO Corse DakarZero wheels for their Magnetic Grey LC 200?
Love to see pictures of these installed as I have only seen the Anthracite.
 
paulunm said:
Fantastic, thank you for the additional pics- and I THINK you just confirmed I can get away with the et30 (15mm more outboard). Same as the OZ that some have here.

Should be hella flush :cool:
Click to expand...
Did you order the 30mm? Would love to see pics.
 
You must log in or register to reply here.

Similar threads

S
  • Locked
On The Hunt
Replies
3
Views
701
ryanCA
ryanCA
CharlieS
Picture request - Rear axle ebrake cable bracket
Replies
5
Views
498
CharlieS
CharlieS
CharlieS
Picture Request - I want to see how the stock exhaust sits relative to the bumper
Replies
1
Views
440
kcjaz
kcjaz
Ackerz
Cruise control hunting
Replies
0
Views
448
Ackerz
Ackerz

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom