Electrical; ?-aftermarket switch to replace electric seat function switch (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2010
Threads
49
Messages
288
Location
Oregon
Putting older LX460 seats in the 60 and the seat switch up/down isn’t working. Tested the 2-wire contacts for motor with pos/neg power supply wires and motor works great both directions as I alternate the +\- contact.
So, ordered on-off-on 3-prong momentary switch thinking power middle and each motor wire on the other 2; no success. Note; ground appears to be through seat chassis to motors via common ground wire from power source after continuity testing.

So tried 7-pin rocker switch and no success.
Here is the LX 460 wiring diagram for the one seat motor (thanks to Ayune) MUD member, years ago.

Try as hard as I can I can’t seem to ‘see’ what seems easy…today is the anniversary of my daughters death…so my brain is trashed from my heart.

I don’t like to bring this up but would really appreciate someone’s wisdom to get me baby stepped through this as likely I’ll be trashed for awhile.
Thankyou
IMG_9249.webp
 
…following up; did a lot more research; tell me please if this is or is not the solution?
—4-pin momentary toggle switch; power and ground wires..then the 2-motor wires?

Thankyou.
 

Users who are viewing this thread

Back
Top Bottom