Dummy taillight replacement for 200 and lx570 (1 Viewer)

[vadym6491]

So I noticed a few people mentioned they would be interested in a drop in housing for Baja designs or rigid pods to replace the dummy lens in the rear. I currently have a set of lx570 dummy lenses to experiment with but does anyone know what the interchange between part numbers on Toyota and Lexus is or what years those light changed? I’ll post a picture of the part number for the lenses I have since those will probably be the first ones I make. And lastly I just want to see how many people would be interested and what brand light should I make them fit.

 

[vadym6491]

So I noticed a few people mentioned they would be interested in a drop in housing for Baja designs or rigid pods to replace the dummy lens in the rear. I currently have a set of lx570 dummy lenses to experiment with but does anyone know what the interchange between part numbers on Toyota and Lexus is or what years those light changed? I’ll post a picture of the part number for the lenses I have since those will probably be the first ones I make. And lastly I just want to see how many people would be interested and what brand light should I make them fit.

Something like this although I done really like the flush mount style light, done like being able to see the mounting hardware

 

[CharlieS]

I have posted them here before.

Auxilliary reverse light project - Anyone have advice for drilling reflector lenses? Running wires?

Nice, Eric. Guess I'm not that original after all. :) if you get a chance, check out these lights - they are 1000 raw lumens and have a very small housing. The hole is only 1-3/4", it fits in the housing easily, and you preserve the reflector functionality (it is on the lower half of the...

forum.ih8mud.com

 

[TeCKis300]

If you don't want to see the hardware for the expo look... Depending on what your purpose for the light is, uou can make the light functional by adding a socket and bulb.

 

[2014 LEX 570 GA]

So I noticed a few people mentioned they would be interested in a drop in housing for Baja designs or rigid pods to replace the dummy lens in the rear. I currently have a set of lx570 dummy lenses to experiment with but does anyone know what the interchange between part numbers on Toyota and Lexus is or what years those light changed? I’ll post a picture of the part number for the lenses I have since those will probably be the first ones I make. And lastly I just want to see how many people would be interested and what brand light should I make them fit.

I am interested! I cracked my rear bumper on a pole recently and would love to be able to plug a pair of these into the new bumper once I get the work done.

 

[Fisher23]

2016 is the LC change.

 

[bloc]

Note that the lower portion of the factory assembly is a reflector, and a good one at that. This could prevent an accident in the event lights go out or parked.

Credit to @CharlieS for this solution

That said these are the relevant part numbers for 200s. Unsure what differences would exist beyond that.


USDM Landcruiser 200
Up to 06/2009 build date Right 81480-60010
Up to 06/2009 build date Left 81490-60020

07/2009 to 01/2014 Right 81480-60030
07/2009 to 01/2014 Left 81490-60040

03/2014 to 07/2015 Right 81480-60031
03/2014 to 07/2015 Left 81490-60041

2016+ Right 81480-60080
2016+ Left 81490-60080



USDM LX570
Up to 12/2011 build Right 81480-60010
Up to 12/2011 build Left 81490-60020

1/2012 to 2015 Right 81480-60050
1/2012 to 2015 Left 81490-60060

2016+ Right 81480-60090
2016+ Left 81490-60090