Diesel Injector Seals

[knuckle47]

Very new to diesels and I have a weeping fuel injector on a 1995 Toyota 14B. I am not finding ANYTHING to fix this so far. Any search I do brings up Dyna and 14B and still absolutely no sources for anything. It’s as if I made a name up and expect to find parts.

the motor runs great, starts instantly but has this one issue. Does anyone know if there is a possible cross-reference?

 

[OGBeno]

90430-17003. Available from overseas Toyota sources.

Since you have to remove the injector and pull the spill rail off, make sure to get the two copper washers: 90201-08106 (x2 per injector). They are available from any Toyota dealership in the US.

 

[knuckle47]

90430-17003. Available from overseas Toyota sources.

Since you have to remove the injector and pull the spill rail off, make sure to get the two copper washers: 90201-08106 (x2 per injector). They are available from any Toyota dealership in the US.

Thank you - thank you - thank you !

I stopped into a Toyota dealer and while the young man was nice enough, he had no idea what I was talking about. Most of the vehicles they see are 2015 and up. If I may ask… do you have a recommended source… I was at the point of selling this truck after two weeks of having it at my house ….finding absolutely nothing.

can you recommend any form of exploded parts number diagram manual ?

again….thank you

 

[OGBeno]

I would contact Dave Stedman @Japan4X4 in Japan.

He can assist you with anything you need for a 14B.

Tell him Onur sent ya.

 

[knuckle47]

I would contact Dave Stedman @Japan4X4 in Japan.

He can assist you with anything you need for a 14B.

Tell him Onur sent ya.

I can’t thank you enough….

 

[OGBeno]

No worries bud. Good luck.

 

[mudgudgeon]

Did you manage to get TOYODIY working for you?

Once I find a diagram and part number, I copy the 10 digit part number, and search by list number on partsouq.com as a first stop for pricing and availability.
I've used Dave Stedman to source parts too. He's very helpful and will track down what you need.

1995 Dyna 200 with 14B

ToyoDIY.com

 

[mudgudgeon]

Or,

Go straight to partsouq.com
All the parts diagrams are available, no log in required.


Scroll down on the Partsouq home page and click on the Toyota emblem, then search, Dyna, enter as much info as you can to find a relevant model.

https://partsouq.com/en/catalog/genuine/vehicle?c=TOYOTA00&ssd=%24%2AKwFEcGF5QyUCAhUHQyJAUhwIKC8xQE9CQ1F-TQUDMCQ4PD49eG9DKQcDBzYgOShuc3lETTQoODZQQB8RQwAeFDENVRMRDRsdVEBFQEVCQFADAR8fA1JLVlUgM31gcFRbUFMbFFJIDwN_I09IPVs6NDZndQ5UW1BTABRSSA9PSBobXFFUERkWDRsdQkUNAAAAAHuhYTo%3D%24&vid=0&q=

 

[knuckle47]

Hello @mudgudgeon So, I tried for 3 days to get registered on Toyodiy however the “captcha” code was never visible. In the end, it just said ….not registered. The image in the box was a tiny blue “?” and not a link to anything. So, I gave up realizing that this is a real source but I would not get access to so, I will try your second option Next

I started to find a few injector seals and rail gaskets and ordered those….thank you @OGBeno. Some of these are local and very inexpensive crush washers….one injector seat was $4.24 US but the shipping was $18.00

I also wrote Dave and he was spectacular in getting back to me immediately …. There is a golden week in Japan so it will take a few days to get some information but that is fine… I could love a 5 day weekend but we don’t get them here. I feel much more at ease know I can get the parts. I will say right now…. the 2F motor is a piece of cake by comparison….

Thank you kindly for your advice and checking in….by the way, I did print that 14B manual you sent…over 160 2-sided pages. It lives on the front seat right now

 

[mudgudgeon]

Sounds good.

Partsouq is a good resource, I find Toyodiy a little easier to navigate, but both have the same info