- Location
- United States
**Note: this tent is a larger version of what GOFSR put into production for the base camp trailer** ASKING $3800
Restored truck bed trailer with GO FSR tent. Tent folds out and onto the ground. There is another awning with sides and floor that zips on to the expand sheltered and sleeping area. Tent has a 4inch thick mattress that is somewhere between a king and queen size. GO FSR is based in Bend, OR and sells these tents in their custom trailers. See 1st photo (manufacturer photo) showing how it looks with everything (extra room) set-up. We restored a ‘81 Chevy Luv truck long bed trailer to serve as storage and a base for mounting the tent. New, professionally installed tongue by Atlas Sheet Metal in Dallas. Frame and truck bed treated with POR-15 to seal and prevent rust before paint was applied. There is weather stripping that seals around the top of the trailer to keeps the storage area dry and dust free. The trailer has a new 3500lb axle, 6 lug hubs, 3 16 inch Toyota alloy wheels that match a 4Runner we use to own. 2 new 265/75R16 Kanati Ground Hog MT tires (10 ply). 1 new Cooper ATP tire mounted as a spare on front of trailer. Monroe shocks. Custom built hitch. Uses 2 inch ball. 15 gallon water tank with 12volt pump and hose. Front mounted cooler/gear basket. Jerry can and locking carrier. Camping gear stored under the tent and accessed from opening the tailgate or from lifting up doors under the bed. We’ve put less than three thousand miles on this set-up. Quick set-up and made to travel on and off road. We had to sell it, but we have a school bus project we are working on to replace this rig. DM with questions.
Restored truck bed trailer with GO FSR tent. Tent folds out and onto the ground. There is another awning with sides and floor that zips on to the expand sheltered and sleeping area. Tent has a 4inch thick mattress that is somewhere between a king and queen size. GO FSR is based in Bend, OR and sells these tents in their custom trailers. See 1st photo (manufacturer photo) showing how it looks with everything (extra room) set-up. We restored a ‘81 Chevy Luv truck long bed trailer to serve as storage and a base for mounting the tent. New, professionally installed tongue by Atlas Sheet Metal in Dallas. Frame and truck bed treated with POR-15 to seal and prevent rust before paint was applied. There is weather stripping that seals around the top of the trailer to keeps the storage area dry and dust free. The trailer has a new 3500lb axle, 6 lug hubs, 3 16 inch Toyota alloy wheels that match a 4Runner we use to own. 2 new 265/75R16 Kanati Ground Hog MT tires (10 ply). 1 new Cooper ATP tire mounted as a spare on front of trailer. Monroe shocks. Custom built hitch. Uses 2 inch ball. 15 gallon water tank with 12volt pump and hose. Front mounted cooler/gear basket. Jerry can and locking carrier. Camping gear stored under the tent and accessed from opening the tailgate or from lifting up doors under the bed. We’ve put less than three thousand miles on this set-up. Quick set-up and made to travel on and off road. We had to sell it, but we have a school bus project we are working on to replace this rig. DM with questions.
