Cruiserfest FS 40 tub, T-max winch,ARB roofrack, 60/62 parts, some 80 stuff

[ginericLC]

Location

United States

I'm headed to Cruiserfest this weekend and I have a bunch of parts. I have a fiberglass FJ40 rock crawler tub with an unfinished cage and fiberglass one piece hood $650 for everything and I have a couple of sets of not perfect fenders and aprons I'll toss in. The T-max is a 9000lb winch that I've seldom used on my 100, $350. The ARB roofrack with the mesh floor and foot kit I'm firm at $600. I also have a lot of FJ60 and FJ62 parts (interior brown on the 60 and grey on the 62). I have doors, liftgates, fenders, tailgates, wheels etc... rust free. I do have some odds and ends 80 stuff but most of it is gone. I have lots of OEM brown jacks, $25 each. I am not hauling down 6300 lbs of stuff like I did last year. If somebody wants something shoot me a PM before I head down and I'll bring it along. Otherwise it is staying put in Idaho. Shoot me a PM before Wed. and I'll load up what you need.

Eric V.

 

[ginericLC]

I'll post some more pictures later today. I also have a super clean rust and dent free 80 series gas tank $100 with the skid plate. I have too much crap.

 

[iH88mud]

I'm interested in the ARB roof rack.

 

[arcteryx]

kyle- if you get that, your truck is gonna be styling with the ARB bumper you are getting!

 

[iH88mud]

Cheers to that! Also, I might be interested in the winch.

 

[ginericLC]

I'm willing to ship but it would be next week before I could get it to the freight dock and of course the shipping would be on your dime. Well probably quite a few dimes. I have a YRC commercial account and I could get a quote from them. Or I think the roofrack would squeeze in on greyhound just barely.

 

[arcteryx]

FYI- Package Express via greyhound has limits of 30 inches X 47 inches X 82 and a 100lb max. Greyhound PackageXpress - Terms & Conditions

 

[ginericLC]

Darn 2" too wide. Jason, have they ever actually measured your width when you've done it? They've always just measured the heights. I wonder how wide the hoods I've shipped were? You are going to laugh but I have a crate for it in the backyard. Our neighbor bought one of those ATV racks for the back of his pickup and it came in a big crate and of course I was all over it

 

[arcteryx]

Yea, I am all over large boxes too when I can. :0

They measure the length and, if it's close, the width too. That's the dimension of the bus' basement. If its close like this, it may be able to go at an angle, but it depends how well you know the greyhound counterperson as well as distance it's traveling. If the distance isnt too far, they may do it, but knowing where both of you are, they may say no since it will require many hops (they plan each hope before it gets loaded, so Boise to SLC, SLC to Grand Junction, Grand Junction to Denver, etc.) At least that has been my experience here in Austin.

Maybe try uship.com or mudhsip, or even fedex/ups to a business address since it's relatively thin.

 

[ginericLC]

Winch sold.

 

[ginericLC]

A few pictures of the body parts available. I bought this truck strictly for the rear quarter panels for my project truck. It had a rod go through the side of the block. The transfer case is gone, but most everything else is still available.

 

[ginericLC]

A few more body parts. This truck is a rust free Idaho high desert truck.

 

[ginericLC]

The ugly parts of the cut 40 tub. It is great for someone wanting to make a crawler. Toss the body and cage on your chassis and away you go.

 

[ginericLC]

Some 62 parts. That fender is in awesome shape. note the axles are not from Idaho.

 

[ginericLC]

Brand New Mallory Distributor, Coil, and Ballast Resister for a 2F. $170 for all of it. 60 grill with some chrome peeling, or just the emblem.

A lot of this big stuff I'd prefer not to ship, but I will on your dime. I can bring any of this stuff to Cruiserfest but I won't bring any of it unless we make a deal prior to Thursday 6/21/12

 

[Alidad]

I'm headed to Cruiserfest this weekend and I have a bunch of parts. I have a fiberglass FJ40 rock crawler tub with an unfinished cage and fiberglass one piece hood $650 for everything and I have a couple of sets of not perfect fenders and aprons I'll toss in. The T-max is a 9000lb winch that I've seldom used on my 100, $350. The ARB roofrack with the mesh floor and foot kit I'm firm at $600. I also have a lot of FJ60 and FJ62 parts (interior brown on the 60 and grey on the 62). I have doors, liftgates, fenders, tailgates, wheels etc... rust free. I do have some odds and ends 80 stuff but most of it is gone. I have lots of OEM brown jacks, $25 each. I am not hauling down 6300 lbs of stuff like I did last year. If somebody wants something shoot me a PM before I head down and I'll bring it along. Otherwise it is staying put in Idaho. Shoot me a PM before Wed. and I'll load up what you need.

Eric V.

Have you sold your ARB roof rack already?
Thanks,
AD

 

[wileycoyote]

Long shot but still have the tub? If so pm me

 

[mobydick]

How about the front bumper, is that available??

Also, see those orange/clear front corner lights? I have a '62. You think they would fit where my clear corner lights are?? Do you have a '62 there you could compare to?

 

[ginericLC]

Yes I still have the 60 bumper. I have that whole rolling chassis from that truck.

And the corner lights are not interchangeable between 60s and 62s. I don't think I have those 60 corner lights any more. I do have a set of the clear 62 corner lights though.