Parting Out (Columbia, SC) 2000 LX470. Vultures descend.

[ihadmail]

I will no longer be able to offer any parts from this vehicle. I am sorry for the inconvenience.



2000 LX470. 234k miles. Ran and drove great before the wreck. Make me offers on what you want, if you ask for a price and think the one I respond with is too much you're still welcome to make offers.

I won't have time to respond to inquiries about parts that are listed as no longer available.

For anyone that's curious, it was on the trailer during the wreck.

Known Damaged Parts:
-Steering rack was leaking badly before wreck.
-AHC shocks (probably accumulators too) were ruptured by tow driver pulling down too hard on the truck.
-All windows, exterior body panels.

Aftermarket parts still on vehicle and in presumed good condition:
- 30mm rear spring spacers
- Japan4x4 AHC spacers front and rear
- Light Racing UCA

No longer available parts:


Photos (will update with better photos when I can)

 

[ihadmail]

More photos:

 

[TRAIL TAILOR]

Yikes.... Those Dissent bumpers are getting some crash testing performed of late...

Hope everyone was ok!

J

 

[ihadmail]

Yikes.... Those Dissent bumpers are getting some crash testing performed of late...

Hope everyone was ok!

J

You may be thinking of this one twice! It was on the trailer due to being totaled after a front end collision with a tree. I posted those pics in he dissent bumper thread.

 

[TRAIL TAILOR]

You may be thinking of this one twice! It was on the trailer due to being totaled after a front end collision with a tree. I posted those pics in he dissent bumper thread.

Good lord.. That cruiser's/LX number was UP... twice.. (Final Destination)

 

[bumpersignal]

How much for steering wheel and shifter knob?

 

[Rcmay]

center console cup holder assembly?

 

[ihadmail]

center console cup holder assembly?

The forward cup holder or the one that flips down in the rear for the second row?

 

[ihadmail]

How much for steering wheel and shifter knob?

Per my PM:

 

[Rcmay]

The forward cup holder or the one that flips down in the rear for the second row?

the cup holder that is under the drivers arm rest

 

[ihadmail]

the cup holder that is under the drivers arm rest

Ahh. I'm not even sure if it was still there on my LX or not. I'll check next time I can make it to the shop and PM you.

 

[Rcmay]

Ahh. I'm not even sure if it was still there on my LX or not. I'll check next time I can make it to the shop and PM you.

10-4

 

[ihadmail]

the cup holder that is under the drivers arm rest

There is no cup holder in the lid of my center console. I assume a previous owner removed it.

 

[WarWagon]

Guess it never had a roof rack?

 

[ihadmail]

Guess it never had a roof rack?

The OEM rack was replaced with a Gamiviti which has been sold.

 

[ihadmail]

As requested per PM.

Pictures of the master cylinder/abs booster with approximately 3000 miles since rebuilding the master cylinder.

 

[Fromage]

Hi, I would be interested in both rear backing plates, loaded with the parking brake stuff (bellcranks, pivots, etc). I have an 80 and I believe they interchange. Only interested if they are in good shape (very little to no rust). Thanks!

 

[ihadmail]

Hi, I would be interested in both rear backing plates, loaded with the parking brake stuff (bellcranks, pivots, etc). I have an 80 and I believe they interchange. Only interested if they are in good shape (very little to no rust). Thanks!

I will try to get you some pictures the next time I'm at the shop. You only want the parts at the axle, correct?

 

[ScubaJon]

how about the bezel around the radio with all the environmental controls switches and buttons. including all the control boards for the ac.

 

[uzj100]

DO you have any of these covers? The rear cargo area passenger side.

See pics in post.

Covers needed - oem