Parting Out (Columbia, SC) 2000 LX470. Vultures descend.

[ihadmail]

how about the bezel around the radio with all the environmental controls switches and buttons. including all the control boards for the ac.

I do have it. It should still be visually in good shape. The antenna up/down is missing a piece internally. Most of the hvac buttons are either very difficult to operate or don't function at all.

DO you have any of these covers? The rear cargo area passenger side.

See pics in post.

Covers needed - oem

I have all of those pieces pictured. They all have scuffs and marks on them, from the best of my recollection. I can send pics when I have time to run to the shop again.

 

[Riverrunner]

Drivers side spindle and knuckle in good shape?

 

[ihadmail]

Drivers side spindle and knuckle in good shape?

I didn't notice any damage. I can verify that when I have time to get it removed. It would probably need new bearings as they were in my to do list before the wreck.

 

[Riverrunner]

I didn't notice any damage. I can verify that when I have time to get it removed. It would probably need new bearings as they were in my to do list before the wreck.

Thanks, let me know.

 

[ScubaJon]

I will pass then that's what I am trying to fix

I do have it. It should still be visually in good shape. The antenna up/down is missing a piece internally. Most of the hvac buttons are either very difficult to operate or don't function at all.

 

[AZRed]

Do you have the drivers side kicker panel fuse box cover? I have a 2002 and assume it it the same.

 

[ihadmail]

Do you have the drivers side kicker panel fuse box cover? I have a 2002 and assume it it the same.

View attachment 1489688

I am pretty sure that survived. I will snap a pic when I'm back at the shop Wednesday.

 

[Detailx]

Do you have these 2 metal plates? The 3rd row snaps, locks into them and the body on the floor.

 

[87warrior]

Are the rear upper control arms and bushings in good shape? I could also use the front passenger side window switch if salvageable and one of the rear frame mounted bumpstops. Were the drive flanges tight and clunk free, how about the CVs (if OEM)?

 

[AZRed]

Did you get tot he shop to see if you have the drivers side kicker panel fuse box cover?

 

[S.CarolinaFZJ80]

Do you have the fuel evap canister and hoses?

 

[S.CarolinaFZJ80]

Also, looking for the condenser fan and wiring

 

[ihadmail]

I apologize for the delayed resposes. I've been out of town and haven't been keeping up with the forum. I'll be responding to individual requests later today and tomorrow.

 

[lowenbrau]

I'm looking for a centre diff lock actuator if you are willing to pull it and ship to Canada.

Thanks

 

[Royboy40]

Is drivers side, rear trim under tail light above bumper any good.

 

[Royboy40]

Is drivers side, rear trim under tail light above bumper any good.

Do you have rear upper hatch handle

 

[paj262]

Do you have the driver's side front door lock/window switch bezel?

 

[dkevinbarnes]

Is the ABS master cylinder unit still available?

 

[ihadmail]

Is drivers side, rear trim under tail light above bumper any good.

Pretty sure this was damaged.

Do you have rear upper hatch handle

Yes and it's been removed and ready to ship. PM me a reasonable offer.

Do you have the driver's side front door lock/window switch bezel?

Yes. It's been removed and is ready to ship. PM me an offer.

Is the ABS master cylinder unit still available?

It is still available and is also laying in my garage ready to ship. $750 shipped.

 

[digitalmarker]

Did the cat converters get destroyed in the accident or are they available?