Coilover question (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Why can't someone just make those for the six stud knuckles.. I would hate to go back to stock knuckles.. Six stud ones are expensive..
 
Why can't someone just make those for the six stud knuckles.. I would hate to go back to stock knuckles.. Six stud ones are expensive..

what's stopping you from making your own steering arms? It's just metal
 
With six stud knuckles you don't *need* keyed steering arms.

If you wanted to do it, you could easily mill a slot in the six shooter knuckles and arms to put a key in.
 
With six stud knuckles you don't *need* keyed steering arms.

If you wanted to do it, you could easily mill a slot in the six shooter knuckles and arms to put a key in.

his problem is more that he needs a flat steering arm then the keyed part. And FROR is the only shop that advertises a flat steering.

4x4labs will make you whatever you want, they are just hard to get ahold of.
 

Users who are viewing this thread

Back
Top Bottom