Clutch for 12HT

[canadianmedic2]

Does anyone know where to get a clutch for 12HT and the part number?

------------------------------------------------------------
1988 HJ61VX

 

[Greg_B]

Does anyone know where to get a clutch for 12HT and the part number?

------------------------------------------------------------
1988 HJ61VX

Clutch PP: 31210-60100. This will be a North American number and can be had a Toyota. PP crosses with a slew of applications, including 13BT and 1HZ, even though EPC does not say so.

Clutch Disc: 31250-60170. This will be a North American number, and can be had at Toyota. 275mm disc that crosses with the FJ62.

Call Dan at 4WheelAuto. He stocks complete clutch kits, that include the throw-out bearing and pilot bearing afaik.

hth's

gb

 

[dieselDaryl]

I just picked up a clutch kit from Dan yesterday and will be doing the clutch job on Friday. The kit is around $700 and manufactured in Japan. The manufacturer is “RPM clutch” or something close to that. It includes pressure plate, clutch disk and release bearing. The price of the kit beat out Toyota by a fair margin ($200+)

If you want to get the bearing separately the part numbers are as follows:
Pilot Bearing - 90363-15004 (Koyo 62022)
Release Bearing - 90363-45013 (Koyo RCT52S) (same as the FJ60s)

The Pilot bearing was available at BC bearing but the release bearing was a bit more of an issue. It showed as a good number in their system but they said they didn’t know if or when they could get it and how much.

While you are doing the clutch, you might want to check out the rear main seal:

Rear Main - 90311-95002
Rear Main Gasket - 11383-68020


I'll post these part #s as well as the ones Greg provided to the master parts FAQ

Daryl

 

[canadianmedic2]

thanks guys you've been lots of help