Can someone answer a quick part question? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Trukdiver

GOLD Star
Joined
Dec 14, 2015
Threads
18
Messages
86
Location
New Jersey
I need this portion of my exhaust 17450-50070.I have found all the diagrams, but it is not clear to me what bolt/nut combination is needed to fasten the part in. I know I need 4 of them. I figured out that I can use 91515-61035 for the bolt. Can I use 90179-10070 for the nut?

One other thing, which exhaust support hanger of the several available do I need for this part? Or does it not matter?

Thanks a lot. I tried to get parts support, but no answer and I'm running out of time to order. Thank you so much in advance!
 
91515-61035 x4 is the correct bolt
94185-61000 x4 for the nuts
90917-06045 x2 gaskets if you want them
17565-74280 pretty sure that's the right hanger

Cheers :steer:
 
Just an FYI, McGeorge's prices are lower.

 
91515-61035 x4 is the correct bolt
94185-61000 x4 for the nuts
90917-06045 x2 gaskets if you want them
17565-74280 pretty sure that's the right hanger

Cheers :steer:
You're a gentleman and scholar. Thank you very much!
 
Just an FYI, McGeorge's prices are lower.

OK - I'll check it out. Thanks!
 
Darn. Better now than in the middle of the job, I suppose. The gasket you mentioned goes between the tail pipe section and the middle box, fyi. Good luck with your project. Feel free to PM or @ me for any future parts help.
 
Darn. Better now than in the middle of the job, I suppose. The gasket you mentioned goes between the tail pipe section and the middle box, fyi. Good luck with your project. Feel free to PM or @ me for any future parts help.
Thanks again. I'll just put the extra gaskets in the parts box. I have two cruisers and I'll use them at some point. Your help is so appreciated.
 

Users who are viewing this thread

Back
Top Bottom