What would be the best type of bushing to replace the spring bushings on my 60? rubber or synthetic
Thanks
John
Thanks
John
Bushings ? (1 Viewer)
- Thread starter Hondo352
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Spring bushings?
poly. (synthetic)
poly. (synthetic)
Either would work John. I have the OME Poly's and they work just fine.
- Thread starter
- #4
Thanks guys. I'm going to try my hand at machning a set out of poly and sleeving them with bronze or stainless to try and control the rust on the mounting pins. The front pins are scrap but the rear pins are in good shape.
This ought to be interesting..... I'm game.
- Thread starter
- #6
It was interesting till I was asked to step away from the lathe by the senior machinist. So the bushings will cost me an apple pie now.
maybe too little to late, but would it have been easier to swap to bolts, and just buy the bushings off the shelf?
Are you milling out bushings, or starting with a block of poly?
Are you milling out bushings, or starting with a block of poly?
- Thread starter
- #8
The machinist told me to go back to welding and leave the machining to them. So I'll have to trust them for now. I did get all new shoulder bolts and shackle material.
- Thread starter
- #9
The machinist did a great job and all it cost was a key lime pie. Now I have to get Phil to come over and do the install for a pastry. 
Coffee is all you need John! Let me know when you're available. I can work my schedule around that. The only day's I'm not available are 12-15 Feb and 20 Feb. Other than that, I'm ready when you are.
- Thread starter
- #11
I'm going to start the removal of the old springs in the morning and hopefully complete the install before the lift is needed by the brother in law. Your welcome to come out if you want. 805 Cedar av. St.Charles
I can get there between 9 and 10. Need me to bring my Sawzall?
I'll call you when I leave here.
I'll call you when I leave here.
Last edited:
- Thread starter
- #13
Call me if you need any further directions. We have tools so don't worry about that.If you still have that carb I could use it since my carb is acting stupid again.
Thanks
John
Thanks
John
Gotcha!
Mission accomplished! We even had the pleasure of having Rob join in!
You have a really nice 60 John! I'm looking forward to seeing the both of you on the trail this year!
You have a really nice 60 John! I'm looking forward to seeing the both of you on the trail this year!
- Thread starter
- #16
Thanks to Rob and Phil for making this job a great learning experience. And thanks to Tony for the springs. I hope to be able to repay you guys in the future somehow.
John
John
YW John! I had my coffee so consider me paid.
Remember to check those bolts in a few days just to be safe!
Remember to check those bolts in a few days just to be safe!
Yeah, I'm good too, John. No repayment necessary. It was nice to get out of the house into a warm shop to bust some knuckles, or in my case, a fleshy skull.
Thanks for the hospitality.
Thanks for the hospitality.
Sorry I couldn't make it to see the fun go down, (not the fleshy skull wound). And I've seen Phil set around & drink coffee before, so I know I didn't miss anything there.
Glad the springs are in & working & your very welcome. Thank you.
My only request, John, is for you to put Phil to work more often & give him all the BS stuff like cleaning, or shoveling pea-gravel, or something else that really sucks. That kinda stuff builds character & I know he could use some character building.
Glad the springs are in & working & your very welcome. Thank you.
My only request, John, is for you to put Phil to work more often & give him all the BS stuff like cleaning, or shoveling pea-gravel, or something else that really sucks. That kinda stuff builds character & I know he could use some character building.
I'm already a character, why would you want to make it worse? No more stickers for you just for that!