Built 85 4runner

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Engine

New Head
New TPS
New Thermostat
Balanced Injectors
New Alternator
New Battery
New Hoses
New Vacuum Lines
2 1/4 inch Exhaust
CA Registered

Front End

30 Spine Longs
4.56 V6 Third
Detroit Locker
Marlin High-steer
Marlin Steering Stabalizer
IFS box with Sky’s Flat pitman arm
Front Range Offroad Steering Brace
New Bearings and seals
ARP Knuckle Studs
Stainless brake lines
1310 CV driveshaft with 6 inches of slip
1.5 inch wheel spacers

Rear End

Wider rear for a 90’s 4runner (bigger drums)
New rear driveshaft
4.56 V6 Third
Detroit Locker
Stainless brake lines

Drivetrain

Rebuilt Tranny
Marlin Dual Cases
Inchworm 5 to 1 in the rear case
Marlin cross member

Suspension

Marlin’s USA 4 inch springs front and rear
Bilistien 5100 (14s in the front, 12’s in the back)
Marlin Spring hanger

Body Armer

Big rocks off-road rock sliders
Rear tube bumper
Front tube bumper with M8,000 lb warn winch with synthetic rope
Front Range Offroad Frame Brace

Misc.

Beard Suspension seats (buckets in the front bench in the back)
Linex rear bed area
CD/MP3 Player
New Windsheild
37 Inch MTR’s on 15x8 Black Steel Wheels with 2.5 Back spacing


I have recipts for everything done. All the parts have less than 5,000 miles on them and 4 trips. I just changed all the fluids with synthetic, runs great, and is ready for the trail. Call 925.998.1638 or email Adam@adamshoop.com with any questions
$8,500
4.webp
2.webp
 
I see from your thread link that you are from Pleasanton, CA....Correct?

So do your front seats adjust?
 
Last edited:

Users who are viewing this thread

Back
Top Bottom