Broken MM

[Tapage]

I have a old MM electric winch .. I bought it around 2004 and work quite good .. well was .. the problem ( it's a recurrent problem ) it's a MM E-12000 I thought was the very first attemp of MM on electric winches ..

The problem on this one ( that let me down in our last trip ) and it's a recurent problem .. it's the clutch.

The section that hold the clutch in the carcas .. the issue is the clutch or the tooth on the carcas won't go deep enough to hold the pull ..

Anyone with the same situation and know how to solve it ?

I was thinking in just get the new gearboz carcas side and use it .. coz mine actually the tooths on mine are worn out ..

in my case the cluch travel just enough to engage the carcas .. but just need more contact area between parts to hold.

Mi intention it's move it to the rear and get a kickass 16.5 for front ..

 

[Tapage]

In my case ( open the winch several times ) the problem it's how much contact get the clutch against the carcas .. but looks like there are not really popular in states ..

 

[Pin_Head]

I am not sure what the problem is, but if the clutch gear won't slide far enough to engage the drum, maybe the free spool lever pawl is worn or the slot that it engages in the gear. The Chinese gear boxes seem to be interchangeable and they are pretty cheap in the US. They are about $85, but you can get the entire winch for about $300.

 

[Tapage]

My winch carcas said T-Max .. where I can contact a T-max dealer to get the gearbox carcas .. ? ( case )

 

[73fj40lc]

You guys must like beating a dead horse.
Save your money and get a used Warn.

 

[Pin_Head]

I am not sure what you mean by carcas, but if it is the gear on the plate with the mounting feet, ebay has them for $38. If it is the planetary gear assembly, you can also get them on ebay.

 

[Tapage]

I am not sure what you mean by carcas, but if it is the gear on the plate with the mounting feet, ebay has them for $38..

Where .. ? ( how to search for that part ? )

found one ..

JEEP WRANGLER 8500 LB / 10500 LB WINCH GEAR BOX BASE | eBay

but isin't for my winch . ( or compatible )

Would be great found something like this one ..

15000 LB Pound Industrial/Recovery Winch/HEAVY DUTY | eBay

and swap the heavy and reduced gearbox and gear plate ..

 

[Pin_Head]

My experience is that many parts from 8,000 to 12,000 pounds winches are interchangeable. It looks like the tooth count matches.

You can get a 12,000 pound gear box and plate here for $85.

http://truckandwinch.com/tuff-stuff-replacement-motor-1.html

 

[Tapage]

You can get a 12,000 pound gear box and plate here for $85.

Tuff Stuff Replacement Gearbox For 12,500 lbs Winch | TruckandWinch.com

big thanks dude .. that's the one that I was looking for .. !

 

[Tapage]

Feedback on this one .. ( kickass winch ! )

Recon 264100BFW 17,500lb Brute Force Series Winch | TruckandWinch.com