Is the bolt pattern and back spacing the same on a 80 as my 62?
Bolt Pattern 62/80?? (1 Viewer)
- Thread starter Gappy
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
bolt pattern is pretty universally 6 on 5.5". I have 60 series rims on my 80 rear axle. Back spacing I couldn't say for sure. I'd suspect 80s have a bit more, but I don't know.
Of course rim diameter is different. 80s with rear discs all had 16" rims.
Of course rim diameter is different. 80s with rear discs all had 16" rims.
- Thread starter
- #3
Thanks Todd
I'm looking at a 80 to buy w/o his tires and wheels and i have the OE wheels with good tires off my 62 that i could throw on.
Anybody varify the backspacing?
the backspacing on an 80 is 4.5" or 4.75" w/16" wheels 93-97'
the backspacing on an 80 is 4.5 or 4.75 w/15"wheels 91-92
the bs on a 62 is 3.75 on a 15" wheel 82-90'
they will work on the back but not on the front
the backspacing on an 80 is 4.5 or 4.75 w/15"wheels 91-92
the bs on a 62 is 3.75 on a 15" wheel 82-90'
they will work on the back but not on the front
- Thread starter
- #5
Thanks for the input Smty!
Stock 62 rims will not work on the back because they will interfere with the caliper on the back, unless it is a drum brake 80 or you grind the hell out of the calipers.
Please don't give up the 62 Tom! Who else am I going to run with?
I'll hold my breath and call you a princess if you do!
If you do sell it can I have your trail armor?
I'll hold my breath and call you a princess if you do!
If you do sell it can I have your trail armor?
- Thread starter
- #8
The 62 isn't going anywhere. I may be looking into an 80 as an extra vehicle. Like I need one more thing to maintain and work on.
