Blue Torch Fabworks Diff Cover

[tclndcrz]

So here is something new and cool. no it is not installed yet. but it will be this weekend when i finally have time.

btw this is the prototype. first one made

 

[brokenparts]

very nice... I'll have to get a couple!

 

[tclndcrz]

oh and the website...
http://www.bluetorchfab.com/oscomm/catalog/product_info.php?cPath=35_139&products_id=557

 

[ridgerunner]

Dang- think that'll hold enough gear lube?

 

[DBS311]

Will these be available for purchase, or is it a custom jobby??

Nevermind, looked at the link.

 

[agent orange]

The welds on the inside look choice.

How thick is that sucker?

 

[PAFJ]

Have you installed this yet? I'm not sure about the 62's but on 60's there is a clamp that bolts to the rear diff for the parking brake cable. What do you do for this?

TIA-

 

[devo]

I was looking at your diff cover and it looks really stout. Then looking at the welded seems I was wondering if you could weld one up that looked like a baseball with weld the same as the stitching on a baseball?

devo

 

[tclndcrz]

Have you installed this yet? I'm not sure about the 62's but on 60's there is a clamp that bolts to the rear diff for the parking brake cable. What do you do for this?

TIA-

yes i have installed it. fits perfect and looks soo badass. i especially like the allen head bolts that replace the studs.

i didnt do anything for the parking brake cable because i dont have one. I put rear disk brakes on and i havent gotten a custom parking brake cable made up. im sure it would be super easy to just weld a little something on there. you could probably cut off the stock bracket and weld that on there. but then it might pull the cable a little tighter than usual.

i will try to snap a shot this week. I went wheelin all saturday but forgot the camera.

 

[Dynosoar]

Just upgrade to FF axles and eliminate the cover alltogether. Maybe even get OEM cable lockers.


Dynosoar

 

[nuclearlemon]

we put treeroot's on last week just before heading out on our ''uca''. thing is heavy duty!

 

[Mace]

Just upgrade to FF axles and eliminate the cover alltogether. Maybe even get OEM cable lockers.


Dynosoar

And watch as the cover smacks into the ring gear when you hit rocks.


FF can answer some problems, this is not one of them..