For Sale bj/hj60 OEM winter cover for rad

[fjbj40]

Location

United States

I have a complete OEM winter rad cover for a BJ/HJ60. This is the one that functions like a window blind, pull it down and it locks in place, unlock it and it retracts back up via spring pressure.

Look in the second post of the attached post. It is rolled up.

Shipping is buyers expense.

$50.00

Cheers,
Daryl


https://forum.ih8mud.com/sale-parts/431731-60-40-stuff-4-sale.html

 

[cruiser_guy]

Daryl, is this a BJ60 or HJ60 screen? I have one from an HJ60 but it seems too narrow for the BJ60. If it's a BJ60 I may well be interested but we'll need some measurements.

 

[fjbj40]

It is from a 84 BJ, I figured there would be no differance in them. The rad support is the same so I assumed so.
I will measure when I get home after work.

Daryl

 

[fjbj40]

The width is 24 3/4" end to end, not including the pins it rides on. The material width is 22 3/4". Material length is 13 1/2 ".

Cheers,
Daryl

 

[cruiser_guy]

Sounds the same. The bolt hole spacing is 26 3/4" more or less?

 

[fjbj40]

sounds about right.

Sounds the same. The bolt hole spacing is 26 3/4" more or less?

 

[cruiser_guy]

Bummer!!

I don't know why mine won't fit then.

 

[HFXcruiser]

Will you take $35 Local delivery ?

 

[fjbj40]

pending payment

Daryl

 

[kim]

Sounds the same. The bolt hole spacing is 26 3/4" more or less?

I just removed this piece from a HJ60 and it was mounted to the AC rad and the bolt spacing is 26 3/4", bang on. If you try to mount it to the rad support, it is about 1" short.

Maybe different brackets for non a/c vehicles? I'd check but the blind on my non A/C 60 is long gone.

 

[cruiser_guy]

I just removed this piece from a HJ60 and it was mounted to the AC rad and the bolt spacing is 26 3/4", bang on. If you try to mount it to the rad support, it is about 1" short.

Maybe different brackets for non a/c vehicles? I'd check but the blind on my non A/C 60 is long gone.

I'll check that tomorrow. This was a non A/C vehicle originally and I removed the rad blind when I put in the A/C but I couldn't seem to be able to re-install it. Maybe it will be as simple as a different set of bolts.

 

[kim]

I'll check that tomorrow. This was a non A/C vehicle originally and I removed the rad blind when I put in the A/C but I couldn't seem to be able to re-install it. Maybe it will be as simple as a different set of bolts.

If you're in the neighbourhood, I'll give you the brackets.

 

[cruiser_guy]

If you're in the neighbourhood, I'll give you the brackets.

I have brackets, at least ones that have the dimensions above.