- Location
- United States
Wanted- injectors, fuel lines, glo plugs for 1977 BJ 40
Wanted BJ 40 parts
- Thread starter Dan DeBlanc
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I have a bunch of left over new Glow plugs
2 packs of 6 for Diesel Land cruiser
Overall Length - 97mm
Glow Tip Length - 28mm x 5mm Diameter
These are for HJ47 / HJ70-75 they should fit a 3B as well if that is what you have?
I have 7.5v and 8.5v ones both work with a 12v system
2 packs of 6 for Diesel Land cruiser
Overall Length - 97mm
Glow Tip Length - 28mm x 5mm Diameter
These are for HJ47 / HJ70-75 they should fit a 3B as well if that is what you have?
I have 7.5v and 8.5v ones both work with a 12v system
i have this left over at my shop in San Diego CA
I have glow plugs from a BJ42... I'm converting to 12 volt and just pulled the originals.
@Pumpkin Troopy I can use the air box if you don't need it. My air cleaner had a bracket welded to the bottom of it and I'd like to replace it with an unmolested air cleaner if possible.
@Pumpkin Troopy I can use the air box if you don't need it. My air cleaner had a bracket welded to the bottom of it and I'd like to replace it with an unmolested air cleaner if possible.
I have injectors and injection lines