Seeking user expertise pairing springs with 5160 rear shocks. Vehicle is stock with max 250lbs gear in rear on occasional trips. No towing. Planning on running 6112’s up front on 3rd perch (1.8”). Considering the following rear springs-Bilstein standard load, OME 2720, or Icon dual rate springs. Leaning towards the Icons but appreciate the feedback. Thanks!
Bilstein 5160 Rear Spring Setup-Icon-OME-Bilstein (4 Viewers)
- Thread starter lcjockey
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Julian73
SILVER Star
OME 2721 is the same spring rate with about 3/4 to 1" extra lift. With your fronts on the 3rd perch 1.8". I would not want the tail down stance of the 2720 spring.
- Thread starter
- #3
Thanks that’s great info! I was leaning more towards the dual rate Icon springs at 1.75” but the OME springs also gave my attention. How would the OME 2721s compare to the Bilstein standard load? I also have no issue going to clip 2 at 1.4” lift. Comfort is the top priority. Thanks
