Aussie People needed

[eman375]

If it's not creating a bigger mess and tons of confusion, I'd be in line for a set of they fit my 75.

 

[OGBeno]

Folks, these are for the later 7x series trucks.

Will they definitively fit the earlier 7x versions? I don't really know. They will be pretty damn close those since not much has changed in the 7x for a long time: that's my educated guess. But I am making no promises.

These will be spec'ed out for RHD trucks.

Will they fit a LHD truck? I don't really know. But I betcha they will be close, or can be modified to be close in terms of fit.

Anyway, only one person has contacted me DIRECTLY to get in on the order I have coming through @Locked79 (Brian).

If you are interested, please advise (IE: contact me directly, not just refer to me in a thread) and I can add you to the list.

No tire kickers on this one please since Brian is being gracious in his assistance and I am fronting everything.

Thank you.
-onur

 

[Gun Runner 5]

Excellent idea .... Thanks

 

[AndrewHadji]

alright... lets see if lightning can strike twice.

i need a wiring harness.... been looking everywhere in canada.... i need it to fit my 1990 hzj75 so that i dont have to hackup the wiring. it looks like i need a 18302b....

TOYOTA Car Radio Stereo Audio Wiring Diagram Autoradio connector wire installation schematic schema esquema de conexiones stecker konektor connecteur cable shema

my radio is on the bottom.... any help would be appreciated

 

[OGBeno]

Do you need the connector and splices that fit the plug you posted? Of the harness itself?

The harness itself will more than likely be way discontinued new from Toyota. Used, possibly, but you will need to actually get the harness part number that is taped to the cowl harness behind the dash.

 

[AndrewHadji]

i can make one with a female or male end... i ll have to make my own anyways it seems.....

 

[OGBeno]

Your's looks like a ten-pin connector.

You probably need 90980-11781. Splices would be 82998-12340 (x8).

 

[AndrewHadji]

can you get those? it will be a start if you could!

 

[OGBeno]

I can check in the morning Andrew.

Thanks buddy.

 

[ozcrusier]

I just ordered front and rear replica vinyl in grey with the waterproof underlay lets see how it looks.
The good news is the underlay sticks to the vinyl not the floor pan so just need to stick it on and trim around the holes before fitting.

 

[AndrewHadji]

Nice! pics when you can please, would be interested to compare prices + shipping to mr toyotas prices+ shipping

 

[Gun Runner 5]

@Locked79 ....
I realize I'm pushing my luck but is there a version of this that is available for the second row of seats?

 

[Locked79]

I'll have a look for you.

 

[Gun Runner 5]

I'll have a look for you.

Thanks

 

[ozcrusier]

Well I just got a email back stating they no longer sell these for copyright reasons. They only sell the heavy duty vinyl that has a orange peel texture.
I just canned the order.

 

[ozcrusier]

I have decided to run carpet and underlay an these vinyl mats to catch any mud etc.
Pics to fallow when they arrive.

Toyota Land Cruiser 75 Series Floor Mats front pair 3D Rubber Vinyl

And for the 78/79 guys

Land Cruiser 78 Series 79 Series Floor Mats front pair 3D Rubber Vinyl

 

[AndrewHadji]

Well I just got a email back stating they no longer sell these for copyright reasons. They only sell the heavy duty vinyl that has a orange peel texture.
I just canned the order.

Dayum...thanks!

 

[OGBeno]

can you get those? it will be a start if you could!

Looks like it is not available from Toyota in the US Andrew. Available from Toyota in Japan.

Splices are available in the US market.

Found the connector here though:

090型II/メス10極カプラ(C)

 

[Brenno]

I'm in Melbourne and maybe able to help out.
I've got an 04 79 series ute if you need differences between RHD vs LHD cruisers.

 

[FJ73Texas]

I'm in Melbourne and maybe able to help out.
I've got an 04 79 series ute if you need differences between RHD vs LHD cruisers.

Are you saying your ute is LHD?