No sorry, its RHD, but i would be able to measure and compare to your LHD rigs.
Aussie People needed
- Thread starter AndrewHadji
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
No sorry, its RHD, but i would be able to measure and compare to your LHD rigs.
- Thread starter
- #62
most of us are rhd ☺
Last edited:
Billyfj7312ht
Should only take ten minutes
Folks:
Those of you who contacted me for floor mats from Australia, here is a quick update.
1. All parts have been purchased from Toyota AUS thanks to our good friend down under Brian, @Locked79
2. I have paid for the parts and shipping.
3. Brian is going to try to get them out before the Easter holiday down under so hopefully they will ship this week and get here mid-late next week.
Once I get the parts I will be contacting each of you separately with a total for the parts, + shipping from Australia, + shipping from me to you in the States.
You can choose whether you want to purchase them or not at that time. You do not have any obligation to do so.
Thanks.
-onur
Those of you who contacted me for floor mats from Australia, here is a quick update.
1. All parts have been purchased from Toyota AUS thanks to our good friend down under Brian, @Locked79
2. I have paid for the parts and shipping.
3. Brian is going to try to get them out before the Easter holiday down under so hopefully they will ship this week and get here mid-late next week.
Once I get the parts I will be contacting each of you separately with a total for the parts, + shipping from Australia, + shipping from me to you in the States.
You can choose whether you want to purchase them or not at that time. You do not have any obligation to do so.
Thanks.
-onur
Catching up on this one. Were you gents able to confirm fitment on the older 7x's?
A few of the trucks in the LCHM have those mats and I'll be dropping by tomorrow night to measure something up, I could drag my BJ74 down if needed.
Also, I've got an LTL pallet leaving AUS any minute now if you want to add it on. It won't change shipping or bond but it will take 4-6 weeks plus clearing here Utah. LMK
Oh, and I want a set it they fit
A few of the trucks in the LCHM have those mats and I'll be dropping by tomorrow night to measure something up, I could drag my BJ74 down if needed.
Also, I've got an LTL pallet leaving AUS any minute now if you want to add it on. It won't change shipping or bond but it will take 4-6 weeks plus clearing here Utah. LMK
Oh, and I want a set it they fit
Billyfj7312ht
Should only take ten minutes
Hi Kurt,
Why don't you wait and check sizes against Onur's delivery and if he has some left you could twist his arm or myself or someone here could send a set to your next supplier shipment?
Why don't you wait and check sizes against Onur's delivery and if he has some left you could twist his arm or myself or someone here could send a set to your next supplier shipment?
Oh, and I want a set it they fit
Sure dude. I bought a couple of extra sets Kurt. Welcome to one.
Parts have shipped folks....
- Thread starter
- #70
Alright, switching gears, now that we got one of the things that i wanted purchased, i need help with shipping logistics from consoles.com.au to the states. Yes i know its going to be pricey, but ready to pull the trigger.
What i need help with is scheduling a transport company to pick up from them and ship. Who do you recommend that i can either deal with over email or get help dealing with?
Ive Heard TNT is good, but their web site is commercial and looks like you have to create a company account. Is that something that one of the aussies can help with?
What i need help with is scheduling a transport company to pick up from them and ship. Who do you recommend that i can either deal with over email or get help dealing with?
Ive Heard TNT is good, but their web site is commercial and looks like you have to create a company account. Is that something that one of the aussies can help with?
I'm here, just shout.
I noticed there is some interest in floor mats so here is the company I use. Link below.
Toyota Archives - No Bull Accessories
I noticed there is some interest in floor mats so here is the company I use. Link below.
Toyota Archives - No Bull Accessories
Sold.
So, the great news is that the floor mats arrived from Australia.
They are Sa-WEET!!
They are a perfect fit for RHD. No interference with pedals, quite nicely made, and very robust.
I think these will work just fine on a LHD truck as well since the pattern is reasonably non-intrusive.
RH Side:
LH side:
The following people contacted me directly and showed interest:
@FJ73Texas : 1 SET
@peterb : 1 SET
@Siflersmom : 1 SET
@1978HJ45: 1 SET + MIDDLE SET
Others stated they were interested but never contacted me directly.
In any event, please email me or PM me and we can get the ball rolling if interested.
Again, big thanks to @Locked79 Brian for all of his hard work on this.
They are Sa-WEET!!
They are a perfect fit for RHD. No interference with pedals, quite nicely made, and very robust.
I think these will work just fine on a LHD truck as well since the pattern is reasonably non-intrusive.
RH Side:
LH side:
The following people contacted me directly and showed interest:
@FJ73Texas : 1 SET
@peterb : 1 SET
@Siflersmom : 1 SET
@1978HJ45: 1 SET + MIDDLE SET
Others stated they were interested but never contacted me directly.
In any event, please email me or PM me and we can get the ball rolling if interested.
Again, big thanks to @Locked79 Brian for all of his hard work on this.
Emailed!
Last edited:
I would like one onur. Pm me the details.So, the great news is that the floor mats arrived from Australia.
They are Sa-WEET!!
They are a perfect fit for RHD. No interference with pedals, quite nicely made, and very robust.
I think these will work just fine on a LHD truck as well since the pattern is reasonably non-intrusive.
View attachment 1234731
RH Side:
View attachment 1234732
View attachment 1234733
LH side:
View attachment 1234734
The following people contacted me directly and showed interest:
@FJ73Texas : 1 SET
@peterb : 1 SET
@Siflersmom : 1 SET
@1978HJ45: 1 SET + MIDDLE SET
Others stated they were interested but never contacted me directly.
In any event, please email me or PM me and we can get the ball rolling if interested.
Again, big thanks to @Locked79 Brian for all of his hard work on this.
Thanks Leo,
