- Location
- United States
My 3rd Gen is currently receiving a full bed replacement. I've removed the bed, rear bumper and roof rack so there are a bunch of items for sale. All items for sale are located in Kennesaw for local pick up only.
WAR Fab Armor - Phantom High Clearance Rear Bumper: $1600 OBO
The bumper has dual swing outs and tree savers. DOM open design. I've modified both swing outs to accommodate a tilted tire carrier and jerry can. The steel is generally in good condition with the exception of minor rock rash, some surface rust and a ding on one of the lower tubes. I recommend a sand blast and powder coat for reconditioning to make it look new. These bumpers are ~$2400-2600 new (unpainted) and currently on "deposit only" order. 3rd Gen Tacoma High Clearance Phantom Rear - Deposit - https://warfabarmor.com/collections/rear-bumpers/products/high-clearance-phantom-rear
Stock Bed Box: $500 OBO
Cement Gray, short bed. Some off-road pin striping but no body damage. It's been cut to fit the above rear bumper. Includes Lil B's bed stiffeners, stock taillights and rubber bed mat. Please don't ask to separate items from the bed--it's a package deal since I'm on a very tight timeline to sell.
DIY Drawer Box: $250 OBO
I made this drawer box to fit inside the bed. It's very minimal and finished with carpet, black paint and aluminum corner trimming. included are two brand new 58" locking drawer slides rated for 250 pounds that I never installed (worth over $200). See sketch for box dimensions.
Victory 4x4 Roof Rack: $500 OBO
Double cab length. In good condition, no damage. Drilled a few holes in the rear panel for chase light mounts. It will include 2 x accessory mount plates, 2 x awning mounts and some additional hardware. Tacoma Roof Rack | 2nd & 3rd Gen (05+) - Victory 4x4 - https://www.victory4x4.com/product/VT23RK.html
WAR Fab Armor - Phantom High Clearance Rear Bumper: $1600 OBO
The bumper has dual swing outs and tree savers. DOM open design. I've modified both swing outs to accommodate a tilted tire carrier and jerry can. The steel is generally in good condition with the exception of minor rock rash, some surface rust and a ding on one of the lower tubes. I recommend a sand blast and powder coat for reconditioning to make it look new. These bumpers are ~$2400-2600 new (unpainted) and currently on "deposit only" order. 3rd Gen Tacoma High Clearance Phantom Rear - Deposit - https://warfabarmor.com/collections/rear-bumpers/products/high-clearance-phantom-rear
Stock Bed Box: $500 OBO
Cement Gray, short bed. Some off-road pin striping but no body damage. It's been cut to fit the above rear bumper. Includes Lil B's bed stiffeners, stock taillights and rubber bed mat. Please don't ask to separate items from the bed--it's a package deal since I'm on a very tight timeline to sell.
DIY Drawer Box: $250 OBO
I made this drawer box to fit inside the bed. It's very minimal and finished with carpet, black paint and aluminum corner trimming. included are two brand new 58" locking drawer slides rated for 250 pounds that I never installed (worth over $200). See sketch for box dimensions.
Victory 4x4 Roof Rack: $500 OBO
Double cab length. In good condition, no damage. Drilled a few holes in the rear panel for chase light mounts. It will include 2 x accessory mount plates, 2 x awning mounts and some additional hardware. Tacoma Roof Rack | 2nd & 3rd Gen (05+) - Victory 4x4 - https://www.victory4x4.com/product/VT23RK.html
