For Sale Assorted FJ60 Parts and Cummins parts in Durham, NC (1 Viewer)

[GLTHFJ60]

Location

United States

For sale are a bunch of various 1987 FJ60 parts, pulled last year. Pictures are in the album, prices below. Prices do not include shipping. All parts were believed to be working when pulled. 2F was replaced with a 2H.

Cummins parts came from a motor with bad rings, so the motor was parted out. Turbo was junk, injection pump sold.

Parts delivered within 10 miles of 27713 for free. Delivery possible, but with a negotiated price, throughout NC, northern SC and southern VA.

https://goo.gl/photos/UFreeBDwGnwZUHiRA

Cummins/Dana parts. If you're looking for other 6BT parts (pushrods, camshaft, crankshaft, connecting rods, etc. just PM me and we'll discuss a price):

Dana 60 4.56 gears gears with open carrier - $75
Cummins 7 plate oil cooler, not rusty - $40
Cummins vertical oil filter plate - $20
Cummins 6BT pickup tube (rear sump) - $20
Cummins 6BT head with valves, springs and retainers, nothing else - $200
Cummins 6BT injector lines (P-pump) - $75
Cummins P-Pump timing housing - $120
Cummins 6BT tappet (side) cover - $60

Toyota parts:

Misc smog equipment with HAC and other valves - $50 - SOLD
Distributor - $75 - SOLD
Rubber distributor cover - not cracked, still pliable - $100
Intake tube (uncracked) - $40 - SOLD
2F PS pump and mount - juicy, wasn't leaking profusely - $40 - SOLD
2F valve cover - $40
Remflex 2F gasket kit - new in box - $40
OEM 2F oil pan gasket - 9/1984-2/1987 - $25
2F valve stem seals - full set, OEM toyota - 90913-02048 - $40
Transmission gasket kit - OEM Toyota - 04331-60041 - $40

Pics of the more interesting items:

 

[fj40z]

Hey Johnny I might grab the smog pump eliminator

 

[GLTHFJ60]

Let me know buddy!! Jason is going to be at my house this week so I can ask him to bring it to you if you'd like.

 

[CaptClose]

If that's an un-cracked cold air intake, I'll take it! Thanks

 

[Random Dan]

I'm interested in the dissy. Do you have any pics of the inside? Mechanical and vac advance working properly?
Thanks!

 

[stoshzack]

I'll take the intake tube. Pm sent.

 

[John McVicker]

I'll take the PS pump & brackets (and hopefully the pulley that's in the picture). Shipping to 93513.

Pm on the way.

Thanks John

 

[GLTHFJ60]

@CaptClose got dibs on the air intake. It is uncracked. Will PM with price.

@Random Dan , here are your pics. Dizzy is in great condition. Mechanical advance as well as both vacuum advances work perfectly. Just tested the vacuum advances with my mityvac. Was thinking about taking a video, but figured it would be overkill

@John McVicker the PS pump is yours. PM reply incoming.

 

[GLTHFJ60]

Added Cummins parts.

 

[stoshzack]

Sorry CaptClose - did not see your post for air intake

 

[fj40z]

Let me know buddy!! Jason is going to be at my house this week so I can ask him to bring it to you if you'd like.

Yeah I'll take it. I'll give him some cash tomorrow and you can just send it back with him if that's ok. Thanks Johnny!!

 

[hank14]

Next in line on the dizzy if Dan doesn't take it.

Also interested in the Smog parts w/ hac valve.

Do you have the bvsv's that are attached to the thermostat housing?

 

[GLTHFJ60]

@fj40z it's all yours my man!

Next in line on the dizzy if Dan doesn't take it.

Also interested in the Smog parts w/ hac valve.

Do you have the bvsv's that are attached to the thermostat housing?

I do not have the BVSVs that are attached to the thermo housing.

Let me know if you want me to box up the smog parts and get you a price with shipping.

 

[Jinks11]

does the AC compressor work?

 

[GLTHFJ60]

does the AC compressor work?

It did when pulled. Clutch engages fine, can feel suction on the suction port and pressure on the pressure port when rotating by hand.

 

[hank14]

@fj40z
Let me know if you want me to box up the smog parts and get you a price with shipping.

I'd like to see if the dizzy is spoken for first. If not, include it as well please.

 

[GLTHFJ60]

I'd like to see if the dizzy is spoken for first. If not, include it as well please.

My apologies, the dizzy is indeed spoken for.

 

[bigfj62]

Do you still have the oil pan for the 6bt? What year is it from?

 

[GLTHFJ60]

I do have the oil pan. Not sure what year it's from because the data plate is missing (see first post).

Let me know if you need pics or other info about it.

 

[bigfj62]

Could you post a pic? I have a 93 6bt. I believe they did not change much.