Grabbed one of the ARB fridges at 4 wheel parts sale. What are you guys using to tie down the fridge to ARB drawers?
ARB fridge tie down/drawer tie down
- Thread starter gearguywb
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #3
Damn....that was too easy.
- Thread starter
- #4
I guess I should have been a bit more specific. It looks like the tie down kit is really designed to be opted to the fridge slide.
Given you cold use any kind of ratcheting type strap, what are folks using to mount in the ARB drawers to afix the strap to?
Given you cold use any kind of ratcheting type strap, what are folks using to mount in the ARB drawers to afix the strap to?
indycole
GOLD Star
I like using VersaTies -- Mac's anchor plates, backing plates, deck hardware, and tie down rings
Markuson
SILVER Star
If you wanna go beefy, you could do what I just posted a thread about...or just do it on a roll-out floor with less than half of what I'm doing:
Drawer Tie-Downs on Steroids
Have a look!
Markuson
PS: @kevinfoutch ...Jinxed on that one!
txgringo
SILVER Star
My dogs ride on my drawers more often than anything else does, so I've been looking for something that is pretty low profile.
Most of the recessed tie-downs that I looked at had pretty serious gaps around the ring, which are great places for the pups to lose a toenail. I ran across these, but it looks like this company isn't around anymore.
129 0612 09 Z+1999 Dodge Ram 2500 Cummins Turbo Diesel+aluminum Tie Downs - Photo 9238359 - 1999 Dodge Ram Cummins - Project Baja Bomber, Part 7
I did some more searching and found these, which are readily available but I'm not sure about the strength. They're certainly not rated at 5000 lbs each like the "tie-candy" mounts, but I figure 4 of them should hold a fridge full of beer in place.
Whitecap Lift Handle - 304 Stainless Steel - 2-1/4'' X 2-5/8''
Lift Handle - S-222 | Cabinet/Hatch Hardware | Products | Whitecap
Most of the recessed tie-downs that I looked at had pretty serious gaps around the ring, which are great places for the pups to lose a toenail. I ran across these, but it looks like this company isn't around anymore.
129 0612 09 Z+1999 Dodge Ram 2500 Cummins Turbo Diesel+aluminum Tie Downs - Photo 9238359 - 1999 Dodge Ram Cummins - Project Baja Bomber, Part 7
I did some more searching and found these, which are readily available but I'm not sure about the strength. They're certainly not rated at 5000 lbs each like the "tie-candy" mounts, but I figure 4 of them should hold a fridge full of beer in place.
Whitecap Lift Handle - 304 Stainless Steel - 2-1/4'' X 2-5/8''
Lift Handle - S-222 | Cabinet/Hatch Hardware | Products | Whitecap
